thnx i am going to try, back in 2-4 min

have tried all the options:

WPA
WPA OR WPA2
Its not WEP or Not encrypted

but it says:
accespoint: no connectuion
SSID no connection
Quality 10/100
Signal strength 0 dbM
Bitrate 1 mb/s
coding: not supported

the weird thing is i can scan for networks and it finds the network which is WPA Personal.

So still having the same issue. Any suggestions?

Ok, the images OpenBlackHole IPTV and OpenPLi 4.0 IPTV have built in the Wifi drivers. Did you tried to install any drivers from the JAM ? As you should not. Installing the clean image should be enough to have your Wifi detected and installed/running.

But I need from you a copy of all text output when you send the command "lsmod", as on your image we cannot see much and most of the Wifi drivers are at the beggining of the answer of the command... I can see only this here that are Wifi drivers. See below. None of them are activated (all to 0).

Admin

somehow cannot copy paste top. So made screenshot


8192cu 572560 0
rt73 420912 0
rt61 316320 0
zd1201 22736 0
zd1211rw 45824 0
ieee80211softmac 31040 1
ieee80211 31840 2
ieee80211_crypt 4816 1
bcm7405 3296800 21
cu1216mk3 8640 1
alps_bsbe2 44096 1
alps_bsbe1 6336 1
stv0299 11984 1
tu1216 42192 1
cxd1981 15744 1
dvb_core 103024 4
tmp100 1600 1
alps_bsbe1_c01a 17216 1
bcm4506 81472 1
lnb_ctrl 6144 4
lcd 44896 1
dreambox_keyboard 4336 0
dreambox_rc2 6400 1
stb_core 19600 11

I don't see any driver running (all Wifi to 0), so the best would be then to install my DE-OpenBlackHole 1.4 Image, and send the same command ("lsmod"), as well as "cat /proc/bus/usb/devices" and copy them here,

Here I have my DM8000HD with DE-OpenBlackHole 1.4, and here is the results I have, as an example for you,

TS

OpenDreambox 1.6.0 + DE-OpenBlackHole 1.4 dm8000

dm8000 login: root
root@dm8000:~# lsmod
Tainted: P
bcm7400 3381120 11 - Live 0xc05ed000
bcm4506 78656 1 bcm7400, Live 0xc0241000
fb 35744 5 bcm7400, Live 0xc01bf000
snd_pcm 72352 1 bcm7400, Live 0xc01cb000
snd_timer 23440 1 snd_pcm, Live 0xc00b5000
snd_page_alloc 8592 1 snd_pcm, Live 0xc008b000
alps_bsbe1_c01a 17216 1 bcm7400, Live 0xc00bd000
snd 51056 3 bcm7400,snd_pcm,snd_timer, Live 0xc009b000
fpga 285264 1 bcm7400, Live 0xc01fa000
bcm4501 55888 1 bcm7400, Live 0xc01a3000
cxd1981 14400 1 bcm7400, Live 0xc0081000
tu1216 42192 1 bcm7400, Live 0xc00a9000
alps_bsbe1 6400 1 bcm7400, Live 0xc004f000
stv0299 11984 1 alps_bsbe1, Live 0xc0087000
dvb_core 103216 3 bcm7400,tu1216,stv0299, Live 0xc0188000
max4397 3200 1 bcm7400, Live 0xc0052000
alps_bsbe2 44096 1 bcm7400, Live 0xc008f000
lnb_ctrl 6144 5 bcm4506,alps_bsbe1_c01a,bcm4501,alps_bsbe1,alps_bsbe2, Live 0xc0
07e000
cu1216mk3 8640 1 bcm7400, Live 0xc007a000
dreambox_keyboard 4336 0 - Live 0xc005d000
dreambox_rc2 6464 1 dreambox_keyboard, Live 0xc005a000
wlan_scan_sta 13312 0 - Live 0xc0075000
ath_rate_sample 15936 1 - Live 0xc0070000
ath_pci 215344 0 - Live 0xc0152000
wlan 262256 4 wlan_scan_sta,ath_rate_sample,ath_pci, Live 0xc0110000
ath_hal 284192 3 ath_rate_sample,ath_pci, Live 0xc00c9000
lcd 19168 1 - Live 0xc0054000
stb_core 51168 16 bcm7400,bcm4506,alps_bsbe1_c01a,fpga,bcm4501,cxd1981,max4397,a
lps_bsbe2,lnb_ctrl,cu1216mk3,dreambox_keyboard,dreambox_rc2,lcd, Live 0xc0062000
root@dm8000:~#


root@dm8000:~# cat /proc/bus/usb/devices

T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.4-dm8000 ohci_hcd
S: Product=BRCM OHCI
S: SerialNumber=ohci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.4-dm8000 ohci_hcd
S: Product=BRCM OHCI
S: SerialNumber=ohci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.4-dm8000 ehci_hcd
S: Product=BRCM EHCI
S: SerialNumber=ehci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2
B: Alloc= 0/800 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.4-dm8000 ehci_hcd
S: Product=BRCM EHCI
S: SerialNumber=ehci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 3
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04cc ProdID=1520 Rev= 2.00
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms

T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=058f ProdID=6362 Rev= 1.00
S: Manufacturer=Generic
S: Product=Mass Storage Device
S: SerialNumber=058F312D81B
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
root@dm8000:~#

in the screenshot there is rt5370 running (picture i attached after editing) .

Sorry dont know how to copy paste it all.

Your screenshot shows more, so you have a Ralink, can be RT3070, RT5370 etc. As you see, it's set to 1.

Try to install the latest OpenPLi 4.0 IPTV, and I am surprised as I have another friend with the latest OpenBlackHole IPTV, that is running the RT5370 no problem on it.

As wrote before, reinstall a clean image, the latest, OpenPLi 4.0 IPTV as well as the OpenBlackHole IPTV to see how these react. Don't install any driver from any panel as all drivers are already built-in and automatically working.

The thing you can try is to remove the RT7777 driver from the /lib/modules/..../net/wireless/ that could be creating issues (?), as it's same family of chips as RT5370sta and then reboot.

TS

I have the same type of box here, with RTxxxx chipset, we are going to take a look as what you describe happens to me as well with OpenBlackHole IPTV v22 image,

Try to see if the behavior is same on OpenPLi 4.0 IPTV v22... and let us know.

Admin

root@dm800se:~# lsmod
Module Size Used by
tun 9792 1
ipv6 279888 14
rt5370sta 887616 1
8712u 359968 0
8192cu 572560 0
rt73 420912 0
rt61 316320 0
zd1201 22736 0
zd1211rw 45824 0
ieee80211softmac 31040 1
ieee80211 31840 2
ieee80211_crypt 4816 1
dreambox_keyboard 4336 0
dreambox_rc2 6400 1
bcm7405 3296800 36
cu1216mk3 8640 1
alps_bsbe2 44096 1
alps_bsbe1 6336 1
stv0299 11984 1
tu1216 42192 1
cxd1981 15744 1
dvb_core 103024 4
tmp100 1600 1
alps_bsbe1_c01a 17216 1
bcm4506 78656 1
lnb_ctrl 6144 4
lcd 44896 1
stb_core 19600 11


root@dm800se:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:09:34:2C:36:35
inet addr:192.168.1.222 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::209:34ff:fe2c:3635/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:877 errors:0 dropped:0 overruns:0 frame:0
TX packets:291 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:74111 (72.3 KiB) TX bytes:29453 (28.7 KiB)
Interrupt:16

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:784 (784.0 B) TX bytes:784 (784.0 B)

ra0 Link encap:Ethernet HWaddr 7C:DD:90:2C:BF:E8
inet6 addr: fe80::7edd:90ff:fe2c:bfe8/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:18329 (17.8 KiB) TX bytes:111744 (109.1 KiB)

tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
-00
inet addr:10.8.55.1 P-t-P:10.8.55.2 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

Thanks, tomorrow i will check and let you know more.

Thank you ! We are on it ;o), thank you for advising us,

TS