Factory_Image_openATV-dm520-exp-2017-04-05-17-07.tar.gz

MEGA : https://mega.nz/#!LA5jEQZZ!ZlvcQkNYOpbcJ-zLBu3YfxHOwmwZVM5v0kn0FljekQo

And Latest OpenATV 6.0 : https://www.datafilehost.com/d/276640c6

wht is the username and password to connect to dcc

Username : root
Password : no password so type enter/return

Admin

how can connect on dcc ?
i can connect on ftp

Remember that if for login there is no password, then you can use only Telnet and FTP. SSH/WinSCP in SSH mode can be used only if you setup a password.

TS

how can setup one password in this image ?

Telnet to the box and use command "passwd" to set a password.

Admin

thank you for openatv 6.0 work perfect

I have a clone dm 525 combo, after the openatv 6 firmware the box stopped loading, I can not connect to the web, I need help, thanks

Which exact image did you flashed (Please give us the link where you downloaded the image you flashed),

And which sim is on your box, Sim Japhar for DM52xHD or Sim 2.30.

Admin

P.S.: Please post only once your question, no multiple posts for the same question. Thank you !

hello, I downloaded from MEGA with your link, it was November 24, I do not remember ... I want to clarify the problem, the box did not react when the LED was lit without blinking red color. after I turned off and removed the HDMI cable and then turned on the box there was a normal download, and so constantly. if there is a cable in the port, the imager does not load and the red light is constantly on, and without it, it is tested without problems. Thank you.

sim 2.30

and still wanted to disturb you, I can not normally log in on the forum, I have to use the first link of your letter in the mailbox about the successful registration of the etoy, I apologize for the question not on the topic)))

Some browsers are buggy (explorer, safari, etc), Chrome/Firefox work to login via the japhar.com page, on the older/others you will need to use ourdreambox.com.

The problem you have is due to the Recovery Mode of the Sim 2.30 box, that has a software working that way, it's difficult to get it activated, you need to retry again and again until successful.

Admin

I do not quite understand what kind of attempts it is? ... you could not give me a link to the normal image openatv 6 sim 2.30 for clones dm525 combo, thank you.

We are Japhar Sim Forum... not Sim 2.30 forum. Contact your supplier for support. Japhar has it's own sim for DM520HD... FYI.

It's like if you would ask Ferrari Sports Cars to give support for BMW cars.

Admin

clearly, thank you, I understood everything, Mr. Ferrari)))

This image had file/folder permission issue affecting ftp.

find / -user 1001 -exec chown root:root {} \;
reboot to allow ftp to start properly

Just correct it and ftp will be working
Same old same old password of clone Dreambox.

No root password for telnet.
root FTP, the usual d~x

hi, i just bought dm 525 with sim230 openatv i can't find password of telnet and blank don't work say telnet password incorrect

How do you connect with which tool ? SSH/PUTTY ? If yes, this is normal you NEED to connect via Telnet protocol when there is no password. Then set the password and you will then be able to go via SSH.

TS

i install putty i set ip on host name and connect with telnet say login i put root and password leave blank but again say login incorrect

Are you sure when you set Putty, you put it in Telnet mode, port 23 ? Japhar images are with no password, but naturally with username "root", then no password.

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=11935#Post11935

Admin

ok its my problem becouse i have old sim 230 but i have and japhar sim supersim 3 that i bought for dm 800 pvr can i use on dm 525 this sim

Yes you can use the Japhar sim that was flashed with DM800HDpvr OS, with Japhar DM520HD OS with a Smartcard reader PC/SC as the GCR2 Reader available on Japhar eShop.

Admin