I recently installed the image "OpenPLi_4.0_Japhar_DM800HD_wIPTV_v22.rar" and after some time (hours) when I try to restart the box I get the following error:

OpenPLi Enigma2 crash log

crashdate=Sat May 20 22:41:57 2017
compiledate=Jan 31 2017
skin=PLi-FullNightHD/skin.xml
sourcedate=2017-01-15
branch=(detached from c9702d9)
rev=c9702d9
component=Enigma2

stbmodel=dm800
kernelcmdline=root=/dev/mtdblock3 rootfstype=jffs2 rw console=ttyS0,115200
nimsockets=NIM Socket 0:
imageissue=OpenPLi 4 %h - Support Forum http://www.japhar.com/


< 4303.341> [eDVBPESReader] Created. Opening demux
< 4303.343> [eDVBPESReader] Created. Opening demux
< 4319.836> [eDVBPESReader] Created. Opening demux
< 4319.837> [eDVBPESReader] Created. Opening demux
< 8065.104> [eDVBSectionReader] ERROR reading section - Value too large for defined data type

Any tips to correct this situation ?


note: I'm testing the image "OpenPLi_4.0_Japhar_DM800HD_wIPTV_v21a.rar" and it works 100%. I install plugins and other programs, reboot, add channel lists, etc. The result is quite positive.

Regards

We need the full log, that you can insert as attachment using the "Switch to Full Reply Screen" where you will file a "File Manager" to add it. Check also how much space left you have in Flash ("df -h"), if you have less than 1 Mb... do some cleaning job.

Admin

Note: This situation only happens when I restart the box. A green screen appears with the error I mentioned above.

We need the crash log that is saved into the hdd (or create a /media/hdd folder).

When the box crash connect to the box with FTP and get the file from /media/hdd that is *.log

Only with it we can give you more details, so be prepared for next crash ;o)

Admin

P.S.: If you prefer... you just published the header of the error log, that doesn't give any information about it, so we need the full log that can be from 8-10kb to 20kb.

OK. I will install version 22 tomorrow and when it crashes I will send the log.

Regards

Thanks, yes,

Admin

Hello.
This are the log's

I see that probably its the EPG Import that do the "last kill", as I found on internet that this could be the reason of the failure... but... 120 kb in Flash... that's a BIG problem.

So try also to launch the clean tool/script to see if you have space left... as 120kb for sure is not enough !

So for me in fact the crash is very logic in this situation, at first reboot you get the EPG imported but you have not Flash to run anything... so clean the flash, run the script from the topic below,

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=7115#Post7115

To gain also some space from the unused Flash (bad blocks), you can flash the box with the Bad Block enabled... sometimes it's worth to do.

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=3137#Post3137

TS

Many thanks, with the tips given I solved the problem.
Is it possible to prepare a pendrive and install this image to have more space to install more extensions and plugins?

Regards

You can always move things to the pendrive,

There is various topics about this in the link below,

http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=79&page=1

TS