12363 Members
237 Forums
7861 Topics
24143 Posts
Max Online: 9115 @ 08/24/24 07:30 PM
|
|
|
valentin: hi, a little help who is available?
Admin: Do a post in the forum
fon: I am trying to buy sim card from website but i am getting no shipping method has been selected. i am inserting correct shipping address and country
Admin: It's fixed, Thank you to have informed us and explained where it was faulty. Now it should work. Thanks
Admin: For DM800HDse Tool to fix problems, check on Japhar images section, for JapharFlasher
Thor: How do I use this stuff can it run on mobile devices.
Hum@xel: Hello @ll sat friends have a nice evening 
|
|
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
|
28
|
29
|
30
|
|
|
|
|
|
|
|
#13405 - 08/18/17 03:02 PM
Triple Tuner for DM800HDseV2 DVB-S2, DVB-T, DVB-C
|
Japhar Member
Carpal Tunnel
Registered: 10/19/10
Posts: 10031
|
Triple Tuner for DM800HDseV2 - DVB-S2, DVB-T, DVB-C for OpenPLi 4.0+/5.0+/6.0+ by Japhar  For OpenPLi 4.0+/5.0+/6.0+ IPTV Japhar Team / MastaG You can also install it directly from the JAM 5.2 from "Plugin OE2.0" section.  It causes lockups and freezes because Enigma2 is trying to
get signal on all ports at the same time.
Also qam256 transponders do not work.
It's best to remove the plugin and configure the tuner
in advanced mode.
Then just use lnb 0 for cable , lnb 1 for dvbt, and
lnb 2 and rest for all satellites.
For example for cable, set an unused satellite to lnb 0
and set "universal lnb" to manual and fill in 00000 for
all 3 values (lof etc).
Disable diseqc and tone mode, then save.
Then choose manual scan and select transponder for scan type.
Inversion on = cable , off = dvbt (or vice versa I forgot :p)
Just scan all cable frequencies one by one by putting a 1
in front of the frequency.
For example 344MHz should be 1334.
Transponder type should be dvbs not dvbs2. Download Link : OpenPLi 4.0+/5.0+/6.0+ IPTV Built-in Image Triple/Trial Tuner DM800HDseV2 How To ? - Download the ipk above - FTP/WinSCP it to the /tmp folder of your box - Launch install with command : "opkg install tripletuner_2.0b-OpenPLi-5.0-Japhar-dm800sev2_all.ipk" - Then reboot the box - The Triple Tuner will then appear in your Tuner list.
_________________________
|
|
Top
|
|
|
|
|
|
#13442 - 08/20/17 12:06 AM
Re: Triple Tuner for DM800HDseV2 DVB-S2, DVB-T, DVB-C
[Re: Admin]
|
VIP Japhar
journeyman
Registered: 12/31/15
Posts: 58
|
Hi
I resolved at last with 'openpli-enigma2-4Plus-dm800sev2' with the metod lnb 0;1;2 .Tnx for all and sorry for what I said about the support.I was impatiently to work and mischievous.
Again sorry for my behavior.
|
|
Top
|
|
|
|
|
|
|
Previous Topic
Index