Hi i have problem with this box after i put all old images for this box can not conect true total comander even dcc i change pass true telnet but no use,i try update image and now Stuck i can not do anything to got rescue mode only blind all time red and blue,i try coonect also by service Cable with dream up but no use any help?

I moved you to the right section, where you have all infos about it. You should ask your supplier, and the 2.30 Sim Team for support.

Or, we created the Japhar Sim for DM520HD exactly for your case, so you can upgrade your box to the Japhar Sim and have support from the Japhar Team. You will find it at http://www.japhar.com/japhar/

TS

You think it will work if i change sim card?

Yes, naturally, we built the sim card and our sim card works,

Admin

But i say that was my box probably broken can not got any more rescue mode only light blue and red,so only replace sim will work you thin is not flash broken?

You have nothing broken, you just need to try few times pressing the frontpanel button, generally it works once on 15-20 tries. So be patient and you will go back to the "Rescue Mode/Image Flash Mode" pressing frontpanel button.

TS

impossible i try like before and when show this that will do rescue mode again only flash blue and red all time i try update rescue mode by telnet upgrade rescue-v and then this shows me at telnet says fatal error and now no use only red and blue is light all time, i try to put loader 103 by telnet i did not know that is this sim 2.30

I hope that you didn't flashed the original/Genuine Dreambox version of the rescue into that box that has a sim that is not from Dreambox... as it's a clone.

Admin

Yeap i did that did not know that is clone 2.30, thats why i told you that even sim card do not work japhar probably flash is dead

Contact Johnny, and check with him, at http://www.jb8a8f8.com/

Admin