I've not installed anything, just the image with japhar sim and DO NOT HAVE WIFI in system/network just Lan.

Then check if your PID:VID is recognized and found (lsusb and lsmod commands), and check to be sure that the right driver is installed.

As the chipset built-in DM800HDseV1/V2 boxes are :
- 0bda:8172 on Sim2 boxes
- 148F:5370 on Ferrari boxes.

As I remember in your case you need the 8192cu driver (as your PID:VID is 0BDA:8178), check and if you need that one, then install it.

Admin

hi
does it work with dm800se v2 sim 2.20 ssl88a

wbr

Yes, if you upgrade your box to the Japhar Sim (http://www.japhar.com/japhar/), so it means you remove the old unsupported Sim2 2.20 and replace it by the Japhar DM800HDseV2 sim.

Admin

Hello
I got a little question
before flashing the secondstage bl and then replacing with the japhar sim
In the tutorial the secondstage file is : secondstage-dm800sev2_allsim.nfi
and in the daily build there is a DM800HDseV2_Japhar_OS_v5/secondstage-dm800sev2_SSL88J.nfi
Can I flash with any of those before replacing with the japahr sim or I must use the one from 2016 secondstage-dm800sev2_allsim.nfi ?
Thank you for the feedback

The SSL88J or the SSL ALLSIM are both "compliant" SSLs compatible with Japhar.

So to do a switch from one sim to another, you need to

- flash the new SSL for the new sim
- turn off box
- open the box and replace the old sim by the new one
- turn on the box in WebIf mode to flash new compatible image
- flash Japhar image

It should work fine.

We explained in the Tutorial a "General way" that would work with any box and any sim, reason of the use of the ALLSIM SSL and for the prior-SSL84, it's necessary to flash the SSL84J/SSL84ALLSIM alone, then turn off box and replace sim and then flash the sim new image.

Admin

P.S.: The difference between the SSL8xJ and the ALLSIM SSL, is that the SSL8xJ is ONLY for Japhar, the ALLSIM SSL will work with any Sim and never give the NO CA ERROR.

Hello
All worked fine
to the point of the image ..
Trying to install cccam from japhar plugin menu
and I just get
Collected errors:
* calculate_dependencies_for: Cannot satisfy the following dependencies for enigma2-plugin-softcams-cccam:
* softcam-support *
* opkg_solver_install: Cannot install package enigma2-plugin-softcams-cccam.


even doing it manually

You need to install as explained the "Softcam Support", that's the last one on the "Cam OpenPLi" List on the JAM, then you will be able to install Cams.

Admin

Ah Ok sorry didnt see that
coming from atv images. but at the end
I installed it manually
opkg is your best friend

Thank you for your support

Enjoy ! We are happy that you solved all, and congrats if you went thru the opkg way, you know what you talk about ;o).

Admin