In this Topic All my Patched BarryAllen Plugin For Ferrari Sim To All Boxes
Thanks to the owner of the BA plugin "gutemine"

**And Will be updated continuously**

(( PLEASE ANY QUESTION OR EXPLANATION FOR BARRYALLEN WILL BE HERE ))

How to install plugin successful
1-From Attach download (HPUSBFW_v2.2.3) Tools and format usb drive (Best way to remove tack from Quick option
2-After format usb connect it to Dreambox
3-Turnm off Dreambox then turn it on
4-Download from Attach BA plugin compress file and extract it then send it to /tmp byDCC
5-Give install command in Telnet:

Code:

opkg install /tmp/*.ipk

6-Do reboot to make sure BA log appear in then booting box

If you can not install Remove old one and install again here how to remove:

Code:

opkg remove enigma2-plugin-extensions-barryallen

((P.S: Install or Upgrade BA plugin only in image on internal flash))

((P.S: After install, uninstall or Upgrade BA, Make reboot better than restart GUI for more stable image))

HOW TO MAKE FULL BACKUP WITH SSL

Simply use DCC go to Tools->Bootmanager->Backup and select Save the image path...DONE , But if you want to put secondstage manually then send SSLxxF.bin to MB_Images and rename it to secondstage.bin then without any change, on DCC go to Tools->Bootmanager->Backup and select Save the image path...DONE . I have modified this steps to make it easy to all

HOW TO Enable Or Disaply Restart Enigma2 For Extract and Backup

Open BA plugin from plugins menu-->Wizard for setup-->no enigma2 restart on extract and backup (On version 7.0.0 and higher)

And give feedback (what box you have and if images extracted or not)

I hope this file help you

Hello ,
is unable to download BarryAllen_11.3e_RAED_OE2.0.rar.

I can't understand what you means ....

good morning, everyone wonders why can not I install barry allien downloaded ipk and given command telnet but do not see it anywhere image nemesis qualquno can 'help me thanks

I send from DCC resp maybe qualquno tells me thank you very much

Delete or rename (movie) folder inside usb or hdd what you have then try to install BA gain ... after install successful then return back movie folder ..

fairbird sorry but I can not in no way to know how to proceed to install it noo folder

what did you mean no folder ?!
It is very simple on install BA (in first post every things you need) ...
1-format usb flash by pc (Fat32)
2-put usb flash in dreambox and turn power on
3-send BA plugin to /tmp and install it ..

for me the same,cant download (only 15,7kb) it but cant extract the rar,only error when i extract the oe2.0 version

which box you have ?!
If DM800se or DM500HD then nfidump file for extract images form last version of BA was expired and there is no new version (gutemine) Stopped to supported OE2.0 he move to OE2.2 only ...
Try with Meoboot plugin ...

If you have DM800HD (Clone) then install BA V11.3e work fine ...

fairbird I dm 8000 hd clone image OpenPLi 4.0

Then use meoboot better ... Because your box as like what i wrote in my previous replay ..
Until now there is no new about BA for OE2.0 for other Boxes just work on DM800 fine ..
We new new nfidump file

fairbirb I not have the / ba

Then BA doesn't installed successfully

fairbird sorry but I can not understand how to install it do even if you tell me I'm 'ba in telnet I appear ie / ba / bin if you explain to me in layman might not understand if you thank you at this time are a little confused maybe too hot; (

Fairbird,

Does a "HowTo" exist for BA ? It seems difficult for many people/members to install it and have it properly working. Could be very handy to have such FAQ / HowTo.

Thank you !

TS

Thank you a lot Fairbird, you will have a lot of new fans for your wonderful job !

Admin

I thank fairbird

ok fairbird successfully installed many thanks

And did you replaced nfidump and tried to install different images ?!

I've screwed up everything anyway always solved thanks to you I reistallato OpenPLi and everything goes perfectly now

good morning , i have install italysat in flash, i have insert usb 2gb preformatted , after reboot , i have test usb mem via italysat blu-red remote controll buttons.the usb stik is present , i install berryallen 11.0.x .when launching berryallen it give me error " insert hdd,ssd or usb " why ? it is present.

with OpenPLi I did not have this problem , I could not start the first image to boot from USB , but it recognize usb correctly and install on usb the ba folder etc etc .

if i resolve that i made a tutorial for beginners.

Thank you fairbird .
I have tested , On my DM800HD (Clone) with supersim openpli 4.0 and then install BA V11.3e work fine ..., that version is modified, because i have test many version of BA but that only work.
Then i want install DEblackhole and italysat in usb stick , i must copy nfi image in /media/mb_Media/ba and install from BA plug in addon ?

Did you read first post ?!
Please read it (Every things there)

and best version is last one 11.3f ...

Thank you fairbird with your BarryAllen i have:

1) Openpli 4.0 in flash
2) On usb -- blackhole 2.1.7 ,Italysat special edition, DEblackhole , OpenATV 5.0,
3) And that's ok
Thanks a lot.

On usb 2gb , the image is very fast .

Happy to hear that

Dreambox 800hd oe 1.6 DE-OpenBlackHole (Toysoft) image , BarryAllen show in boot , but no in plugins got this message :
BarryAllen (__init__() got an unexpected keyword argument " needs restart

Try version 8.9

I installed 8.9 in first post but this message come out

1-Download compress file from Attach
2-Extract it
3-Send file to path /usr/lib/python/enigma2/Plugins
4-Do restart enigma2

P.s:I'm stopped to support old OE1.6 just help you for this image to My friend (Toysoft)

Thank you , but dont work ,same message .
I will try to do something .

Work with me on last version also 11.3f ..
Test it now and works just fine ...
As i said in this path exactly send file after extract it
/usr/lib/python/enigma2/Plugins

Thank you Fairbird, it's always very very appreciated that you support my DE-OpenBlackHole 1.4 image that I really like a lot ;o)

Merci !

TS

Work !!!
/usr/lib/enigma2/python/Plugins

Thank you again .

So, after an evening of messing around with this version of BarryAllen, let me tell you my experience:

1. Tried to install according to instructions given here: FAILED! USB stick could not be formatted to ext3 during installation. (Was formatted with HP Tool before installation, NO quickformat)



2. Tried another USB stick, same result.

3. Used gparted to format stick with ext3 ... SUCCESS! BarryAllen installed correctly but gave a (minor) error



4. Entered BA setup, checked some things, read the manual provided here. Then made a backup of my OS in flash and tried to upload some *.nfi images onto my box. FAILED!

5. Did some research and realized that BA does a symlink from MB_Images in root folder to /media/hdd/backup. This is where the nfi files SHOULD go. UNfortunately, my hard drive is not mounted there, so the files would have gone to flash memory. THAT CAN'T WORK!

6. Symlink from /MB_Images to /media/MY HARD DRIVE/backup and it worked ... I THOUGHT!

7. Copied nfi files from my computer to the folder on the box, WORKED. Entered BA setup and wanted to get the nfi files extracted ... GREEN SCREEN!

8. Green screen gave an OS error because a folder named /ba/ba/MB_Images was not there ... realized that the code pointed to the wrong folder ... should be /MB_Images ... created another symlink ... worked

9. After the nfi files were extracted, I wanted to test BA and rebooted the box ... then, it got stuck at the vmlinux.bz (I think that's the name of the file) ... so at the VERY beginning of the boot process.

10. Wasted hours of testing and bugfixing, just to find out that BA 11.x does not work on DB800HD SE Clone with Japhar SIM and had to restore an old image on the box.

11. Thanks!

Very good analysis of the BA, I personally don't use it as there is many many restrictions in using it, that most of time get it failing. I use only 1 image on my boxes, the DE-OpenBlackHole 1.4 where I don't need IPTV, and the OpenPli 4.0 IPTV from MastaG in the other boxes that works flawlessly, but just be careful of the Flash available, as if you have less than 1 Mb available the box will behave very strangely !

TS

@Murdock0815
Last Version of BA 11.3 doesn't work smoothly with DM800se + V2 , 500HD + V2
Because file (Nfidumo) to extract images was beta and expired now ...
Read in first about it ... You need to change files to Nfidumo 0.4.0 ..
And after extract any image check it out if success extract or not from
/ba/ba/name of image
see inside folder (Is it all directory available ?!)
Then you can boot from that extract image ...

I've tried Barryallen on dm800se a8p and on dm800se sim2.10 boxes. I was able to get them work ok, but there were always a problem on them: after a while I got my usb pen filesystem corrupted and I had it to repair with linux filesystem repair tools. This happens always to me, just a metter of time.
I' ve tried different usb pen different sizes, ext3, ext4 formatting but no success. So I decide to use ItalyBoot multiboot. I had to put Italysat image in flash, but since that I could install all images in multiboot with no problem.
Only issue is that you have mount manually your usb device in the multiboot image or add it in the startup sequence in init.d

Hi

Patched BarryAllen working great on SatgreamGr and other PLi based images on DM8000 original sim.
It always install first hand and works after reboot flawless

I have a problem with my 1.5Tb WD internal hdd.

After install hdd is being locked by a process (samba timeshifting....etc - I can not figure out what) and will not be accessible for root image or any multiboot ones.

I fooled my root image to take a second USB stick as HDD and mounted my primary drive as hdd2. It worked and was still there after reboot.
However in multiboot images will disappear and the only available is BA drive.

Can you advise where I can look and check what process is locking my drive?

I confirm that main hdd drive mount disappear next boot after BA gets installed, I backup my root image and tried 5 times. PLi Device Manager or Mount Manager are not allowed to modify it.

Any tip or advise will be appreciated.
Thanks

With latest barry allen, i cannot select in boot menu. Tried all 4 options in RC. All 4 masks.
How can i get it fixed?

Flash: Openpli 4.1 latest from Japhar.
BA: Peterpan, Openpli, OpenblackHole.

Thanks!

i have an temporary solution. I boot into the image and use the plugin to boot into another image.

I tried with both versions and after choosing the image that is on the pendrive (last BH) it starts but stays on the booting screen.

Try to install the Japhar Image as the Main image, then the other images on the USB Memory Stick.

Admin

I installed the last openpli and stopped again at boot.

Did you installed a Japhar Image as the main image into the Flash of the box ? And then the other images into the External USB Stick ?

TS

I installed an image of you from 2015 due to size (less than 50M). And I tried to install the latest OpenBlackHole and Openpli in the usb.

You need to install the 2017 Japhar Image (OpenPLi 4.0 v22 or OpenBlackHole v22 or DE-OpenBlackHole 1.5 v22) in the Flash, and then the other images in the Usb Stick,

Admin

Thank you very much for the attention but I found what I wanted that would be to expand the flash memory. And yesterday I found "Extend DM RootFS" in OpenPli and now I have more than 7Gb of memory. I do not know how to thank you from Japhar Team.

Well done ! If you can do a little Tuto for the members here for that "Extend DM RootFS", I am sure you will do a lot of happy friends here ;o)

Admin

Yes, I promise I'll do it.

Thank you ! On the Useful Tools and Tip section probably is the best place ;o)

http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=79&page=1

Admin

the solution for the remote to work in the boot menu its to change the .badevice to /dev/input/event0

The BarryAllen_11.3g-RAED doesnt work with my openblackhole v21 after the loading screen the image stays on boot loop so i tried the 8.9 ferrari sim and this one works fine i was using this version but on my estarsim before the problem its that its oe1.6

Barry Allen 13.g works if you add "movie" or "movies" folder to the /mnt or remove/rename the old folder en make a new movies/movie.
It takes a lot longer to install the barry allen 3-4 minutes, but it works. Tested with the latest OpenPLI 4 and With OpenBlackhole latest from this website.

ONLY one Question:

How do you get OPENwebIF back? I managed to do this correctly but it was a coinsidence i think rather than rationally doing the right thing to get it back. Anyone an idea for the latest OpenPLI?

Thanks

Last month, the OpenWebIf was updated to the newer version in the feeds (and originally the source code from the origin repository), early incompatibility ? bug ? Difficult to know.

Admin

It gives error: some plugins are not available:

Extensions/OpenWebif ([erno 2)] No such file or directory: '/media/sda1')

It seems that you need to mount properly the HDD, as /media/sda1 = HDD (esata HDD), or did you move some folders (including the plugins into the hdd ?)... as it looks for the openwebif into the hdd, when it should be into the flash (/usr/lib/enigma2/python/Plugins/...).

TS

i uploaded the plugin from this topic to that folder. Maybe that caused the problem. I am using OpenPLi 4.0

It could have been (The Multi-Boot do a lot of moving around to get things working and increase space), yes as the OpenPLi OpenWebInterface works fine, and last month the new release got the last version of it.

TS

Thank you so much.

i initialised the disk and openwebif came back. It gave an error so none of my content was erased. Now i have Barry Allen and OpenWebIF working.

1. FLASH OpenplI v21a
2. Blackhole
3. Dreamelite 4 (no cablescan, but working timeshift)
4. Openpli v21a edition (daily use) / no working timeshift, but working recording, working Cccam, working wifi
and working OpenWebif. Cablescan doesn't work but i guess this is because of signal not because of image.

Only thing that would be great if i could switch in menu (bootmenu) now it doesn't recognise my remote control.

Thanks for the effort, i think this is one of the best BA ever!!!

I read somewhere in the web about some fix for the Remote Control problem on BA, but I don't remember... perhaps a Google search will get you that last answer. If you find it, please post here.

Admin

The solution is simple just change the .badevice file inside the ba root folder to /dev/input/event0 if you dont have a .badevice file just create one or just download this one and your remote will work in the ba boot menu

Hi i just formated my usb stick to fat32 and tried to install barry allen again but i keep getting this any suggestions how to bypass this

Barry Allen device not mountable after formating, sorry

You Should be to make reboot first after but usb then install plugin again>

Thats what i had been doing format plug in the dongle reboot and doest matter how many time i format it and then reboot im always getting that which is very weird because i had it working fine just decided to give it a wipe and start over see if i could get the new version working but now neither 8.9 or anything works

the .badevice.rar is working!!!! THANKSSS XAPIM you solved a problem i had for a month!

Glad it worked now its me who is stuck lol

My problem is with the upload of Barry Allen, my decoder is DM 8000 with sim japhar, I have installed image Open Black Hole 1.5, installs BarryAllen_11.3g-RAED.ipk and pops error, i would have been someone who has a reliable way to describe in detail upload this plugin Because surely not only I have a problem with it, do one particular detailed description.

Please upload your error ..

Here's a picture of what happens.

Your problem is from usb stick ..
1-remove it and shutdown your box
2-make format to your usb fat32 by pc
3-Return back your usb to box and start box again
4-Then try to install BA

P.s: no need to format usb by box or make mount (BA will be format and mount it)

Hi fairbird!
I have an old problem:
box dm800hd JafarSim, image Satdreamgr-3.0-beta_Ferrari-SSL88F_DM800_20151118_RAED
installed and mounted:
1 - hdd 120GB,
2 - usb flash with three sections:
(1 - /usr (using flash expander), 2 - /media/usb, 3 - swap)

I add 2nd flash USB for BA
After successful installation BA (and also v11.8) missing hdd and 1nd USB-flash, simply no device.

Or is the problem OpenPli image in flash?

This is problem from image ..
If plugin installed on flash successful and you can extract images on external flash .. Then plugin works will ..
So should be to fix image and you can edit fstab files on /etc

thank yo ustaa

Hi guys, I need help please, which latest version of BA works on experimental image on DreamBox 7020HD:

dreambox-image-dm7020hd-20170216.nfi

Thanks !!!!

Hello,

I have DM500HD (clone) with red ferrari sim. I have ssl87f on ferrari sim. I have installed Domica11e-ssl87F-DM500hd-20161019-Houara.nfi on flash. First I tried the BarryAllen v 11.9 (from your post), and I had issues with extracting images. Then I reflashed again Domica11e and the installed BarryAllen v 8.9(from your first post). The installation was succesfull. I can do extract and install of nfi images without problem. I can as well select the image for booting from plugins. This is OK. I tried 4-5 diferent images succesfully.
My issues is that I don't get the boot menu. It is showing the main screen of DM500HD ferrari, then some times is displaying another screen (Ferrari SIM) and then goes to selected image. I can not get at all boot selection screen.

Will this work with original dm800hd and openpli 7.3