DM800HDseV2 : OpenPLi 7.0 RC Homebuild 2018.11.25
openpli-enigma2-openpli7-dm800sev2_Japhar_v5.nfi



- Python 2.7.13
- GStreamer 1.14.4 Stable

MEGA : https://mega.nz/#!KQQSRKqT!6LU4OeDMoq3dC7iJ5kxGds7cDHkxYBm77nUiVYh9OpU

Installed, just two questions, the fan remains on standby as it turns off? the colored volume bar is not visible
mauro

Generally the fan turns on if needed, but this image is directly the one from the sources/openpli git with no extra modification.

Admin

Very dissapointed about this new image, I trry to explain because I'm Belgian en French language:
I have a Dreambox clone 800HD se V2 with the new Japhar sim last version(I forget the ref,sorry) It was with the last image Nonsolosat 10.1 who give me entire satisfaction, and I use iptv service from a French supplier and cccam line from same server, I have a 4 heats with Rihamer favorites.
I try to install the above mentionned image, Openpli but very strange I have always the same list of serices and the older iptv services. but the satelitte is no more working because the cccam is no more working, I find the cccam provider in DCC but on the Dreambox no services, no Iptv from Openpli and impossible to install Tspanel or new cccam.
In addition I try to re install the old image (Nonsolosat) but this is 'no ca found, after a while I retrieve the above Openpli but always with same problems as above.
What do I wrong
Thanks in advance for your attention
Best regards
Suzy

Very strange, as "NO CA ERROR" happens only if you twist the image changing the SSL etc.

So your reinstall of the NonoSoloSat should work fine as before.

Are you sure you use a Japhar Sim in the box ? Which VIP do you have ?

Let us know,

Admin

Yes I'm shure it s a Japhar sim!
I repeat I m french language and I do not speak or write a perfect English, so I do not know what you mean with VIP?
I try to flash with other new image you give in a mail I receive on 1st december like openblackhole, deopenblackhole openpli-enigma2 etc...
the only result is I have my old Iptv channels, all channels I have with the normal sat (4 heads) but impossible to see because cccam not working, I try to re install my old sim but not working.
I do not know what to do.

May I have a answer please, I have a sim Japhar I buy two months ago, see the ref:
ORDER NUMBER: 649
September 27, 2018

And now not working properly, what can I do?

Hello Gaston,

Good, so now we can check which sim you ordered (if it was the correct one for your box). Your VIP is 883. Keep the Japhar sim in the box, that is the best sim for the DM800HDseV2 boxes.

The Sim definitely works, and you confirm it as images are booting properly, and if you use any image on the section DM800HDseV2, it will work. But naturally you just have to install the image and NOT twist/modify, flash anything on top of it like an SSL or anything else. You must just flash the image and set it up with the configuration menus.

DM800HDseV2 Japhar : http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=49&page=1

1) Concerning the Cam, if you use OpenPLi you need to install from the JAM the "SoftCam Plugin", then only install the Cam from the OpenPLi section. If you use any BlackHole image as you wrote, you need to install the Cam from the BlackHole section of the JAM. It's important, as when such software is installed there is some extra scripts installed that are built for the image/GUI that is installed in your box.

2) Concerning the IPTV List, if must be under the format below, that is used for example in our Japhar FTA IPTV List. Check if your file you try to install is correct, and it must be added on the bouquets.tv file that list all the bouquets. Concerning the BlackHole Images, some images require to setup it to use not only the Favourites as main list, but all lists from the bouquets.tv file (in /etc/enigma2). But you tell that your list is working, so it seems ok as well and in the correct format.

Format used on Enigma2 for Streams:


The only point above, that is left for you as a problem, is the Cam, so be sure you install the right one for your image from the JAM, and if it's OpenPLi don't forget to install the "SoftCam Support" Plugin first from the JAM, before installing any Cam from the JAM (or anywhere else).

Admin

Tks, i finnaly flash the openpli ver7 for Japhar, but have problems with the skins (addons?) because no cams installed and impossible to install it. I explain:
first I don t know what you mean with the JAM?
When I go to configuration the ppanel show a black screen
same for installation of additonal extentions, black screen
result impossible to run cccam, there is nothing
I see the Iptv Japhar but just a few channels are working
Can you tell me who install the cam extention and the ppanels?
thks

JAM (Japhar Addon Manager) :
http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=75&page=1

Admin