Welcome to Our Dreambox World - Japhar Sim - SuperSim
Forum Stats
12528 Members
237 Forums
7811 Topics
24004 Posts

Max Online: 9115 @ 08/24/24 07:30 PM
Newest Members
Bilawal, Zweistein, didond, OLIANI, sergiu75
12528 Registered Users
Who's Online
12 registered (karimkaki15, Admin, Toysoft, Smokey, haki, goode men, Franco89, OMEGA, raffsif1234, didond, gerolamo, bori), 928 Guests and 140 Spiders online.
Key: Admin, Global Mod, Mod
Shout Box

Top Posters
Admin 9993
Toysoft 2649
satsedhu 1713
fairbird 765
ludo19 442
Top Posters (30 Days)
Admin 15
OMEGA 8
samh 3
Smokey 1
Hum@xel 1
November
M Tu W Th F Sa Su
1 2 3
4 5 6 7 8 9 10
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30
Topic Options
#4737 - 01/04/16 11:44 PM Jtag Repair for bricked Cloud ibox 2 Plus & Cloud
Admin Online   content
Japhar Member
Carpal Tunnel

Registered: 10/19/10
Posts: 9993
Jtag Repair for bricked Cloud ibox 2 Plus & Cloud 3 Tutorial

Cloud ibox 2 PLUS and Cloud 3 J tag to repair wrong bootloader / bricked / Reflash Tutorial.
Okay with help from all over google land i have managed to repair a few cloud 2 plus boxes with this method and included files.
DO NOT BLAME ME IF YOU CANT FIX YOURS OR BREAK IT EVEN MORE.

Parts and tools Needed:

Windows XP, vista, or 7 machine (Believe linux as well)
micro usb to usb cable
Soldering Iron
Solder
4 x coloured electric wires (i used telephone extension cable as solid core) or jumper cable with male and female pins....(didnt have at time)
A flash interface - CYPRUS Development Board Module for USB2.0 EZ-USB FX2LP CY7C68013A ..... found on ebay
* drivers, and basic hand tools

Please note you need to make sure you flash the correct file for your SOP8 chip. This can be found on the rear of the motherboard.
its a load easier to solder anyway with the board out the box.
See picture below to help you locate it, you need to take note of the numbers on it....
It is the large black chip with 4 pins each side....



From what i have tested and read the following chip part numbers all take the same flash file. (see below for detail)

MX25L3206E
W25Q32BV
KH25L3206E

At this point download the attached filesand extract the zipfile to your desktp.

1. install Broadcom Studio 3
3: Install Bcm97358.msi (install to the same directory)
3: INSTALL NETFRAMEWORK 3.5 THEN NET FRSAMEWORK 4 (i had to for winXP machine)

4: Plug in the Cypress board to a free a USB port. BUT DO NOT connect the CLOUD IBOX to the cypress board yet.
****Disconnect the jumper on cypress board.****

Turn board on with its switch, red led is now lit up.

Then on your computer....
Chose install automatically, the driver installs and after you need to reboot computer.
After the reboot the above wizard appears again only it says:
"This wizard helps you install software for: Broadcom Test Adapter"
Follow the wizard using install automatically and after the wizard is done you are ready installing
Drivers for the Cypress board (Broadcom studio 3 will now know the cypress board).
TURN CYPRESS BOARD OFF

5. Now we need to make a cable between the cypress board and the CLOUD IBOX 3
Pin 1 is 3v3V
Pin 2 is SCL
Pin 3 is SDA
Pin 4 is GND







6: connect the cable between the cypress board and the CLOUD IBOX
7: Start Broadcom studio 3
8: In the menu select :
View => devices => BCM7358
9: turn on the CLOUD IBOX YOU SHOULD SEE CONNECTED



IF YOU DO NOT HAVE DEVICES AS AN OPTION UNDER BROADBAND STUDIO 3 YOU HAVE NOT INSTALLED THE SOFTWARE CORRECTLY....

10: COPY the 2 FLASH FILES SUPPLIED IN THE ATTACHMENT TO COMPUTER/ C:/ PROGRAMS/BROADCOM/BROADBAND STUDIO 3/FLASHES

Select "Flash Explorer"

11: Select "MXIC MX25L3206E" in the type field
12: Select "Refresh" IF CORRECT CHIP / FILES IT SHOULD SHOW DETAILS OF THE CHIP....

13: Select "Browse" and select the file CLOUDBOOT.BIN (included in attachment)
14: Select "Start" You should now see that the flash is being programmed to the CLOUD IBOX
THIS WILL TAKE ABOUT 30 MINUTES....

15: After the programming is finished turn off the cloud ibox, and turn off cypress, disconnect the cable FROM BOX to the Cypress board and turn on the cloud ibox
it should say boot, when it does turn it off....

Then flash an image as normal
put formatted usb stick to fat 32 with XPEEDLX FOLDER ON IT. THEN PUT IT in usb at back of icloud
turn on cloud ibox then let it install image when finished it will say done
Turn off box disconnect usb stick
reboot box & fingers crossed you will get a working cloud ibox 2 / 3

MEGA : https://mega.nz/#!Yxo1hJBI!PJ6v6aFqjGl7aVMHkmXo4wgsRgBo88SH4TyinDWCo4c
_________________________

Top
#15404 - 02/13/18 04:16 AM Re: Jtag Repair for bricked Cloud ibox 2 Plus & Cloud [Re: Admin]
Dr.Taosamran Offline
stranger

Registered: 01/09/17
Posts: 15
Loc: Phitsanulok Thailand
It's so cool.
Thank you very much.

Top
#18192 - 02/26/19 07:47 AM Re: Jtag Repair for bricked Cloud ibox 2 Plus & Cloud [Re: Admin]
Asuchen Offline
stranger

Registered: 12/04/16
Posts: 2
I need to recover a Cloud-Ibox ll plus, where I get jtag information and tools? Thank you

Top
#18193 - 02/27/19 05:01 AM Re: Jtag Repair for bricked Cloud ibox 2 Plus & Cloud [Re: Admin]
Admin Online   content
Japhar Member
Carpal Tunnel

Registered: 10/19/10
Posts: 9993
Check with Johnny at http://jb8a8f8.com

Admin
_________________________

Top
#18198 - 02/28/19 05:31 PM Re: Jtag Repair for bricked Cloud ibox 2 Plus & Cloud [Re: Admin]
Johnny_B Offline
VIPF Japhar
enthusiast

Registered: 03/08/15
Posts: 218
Loc: Netherlands
Or search with google to,
How To Jtag Your IBOX 2 Plus & 3 Guide Compiled & Tested By Ferret
_________________________
Doing nothing leads to nothing.

------------- Please note, for technical support -------------
Will be given here, or on the jb8a8f8 forum and I prefer it in English.
Johnny B.

Click on the banner if you like to go there..

Top
#18207 - 03/03/19 08:05 AM Re: Jtag Repair for bricked Cloud ibox 2 Plus & Cloud [Re: Admin]
Asuchen Offline
stranger

Registered: 12/04/16
Posts: 2
Problem solved, thank you very much

Top


Moderator:  Toysoft 
New Topics
DM52xUHD : OpenATV 7.4 20241125 (Japhar)
by Admin
11/26/24 10:08 AM
DM52xUHD : OpenATV 7.4 20241125 (Original)
by Admin
11/26/24 10:00 AM
Dreambox 500HD ferrari sim ???
by OMEGA
11/25/24 04:28 PM
EchoStar left in limbo as DirecTV ditches Dishdeal
by Admin
11/22/24 02:52 PM
ZX Spectrum ZX81 Emulation : Experience with R36S
by Admin
11/21/24 02:13 AM
Grand chambardement autour des numéros de la TNT
by Admin
11/17/24 05:10 PM
OPENATV 7.5 VOD not possible
by samh
11/03/24 08:37 PM
How to exclude ProvID & Channels from OSCam to CI+
by Admin
11/03/24 12:34 PM
DreamTV Mini Ultra HD Android 9.0 IPTV Streamer...
by Admin
12/04/19 04:06 AM
Satellites.xml for Enigma² by Hum@xel
by Hum@xel
02/02/19 08:37 AM
Spark 7162 : OpenPLi 4.0 IPTV Japhar (April 2016)
by Admin
04/11/16 03:21 PM