12363 Members
237 Forums
7861 Topics
24143 Posts
Max Online: 9115 @ 08/24/24 07:30 PM
|
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
|
|
#1888 - 06/30/15 07:18 PM
Re: DM8000HD tuner connector vdc measurements.
[Re: ]
|
VIPF Japhar
enthusiast
Registered: 03/08/15
Posts: 218
Loc: Netherlands
|
Yeah, this voltage could be 2 to 7 v, However if you remove the psu, or at least disconnected from the motherboard and you add a 3.3v voltage to pin 4. Just as this picture shows, http://www.ourdreambox.com/ubbthreads.ph...-psu-switch.jpgThan this pin 2 should give 6vdc or a bit higher, at least when I tested this way, with several psu's they were al 6v+.
_________________________
Doing nothing leads to nothing. ------------- Please note, for technical support ------------- Will be given here, or on the jb8a8f8 forum and I prefer it in English. Johnny B. Click on the banner if you like to go there..
|
Top
|
|
|
|
|
#1935 - 07/05/15 05:56 AM
Re: DM8000HD tuner connector vdc measurements.
[Re: Admin]
|
Hoffy
Unregistered
|
Just decided to measure a couple old PSU's I have to see if they are any good to use. Are either of them repairable or are their measurements too far out. Anything strike you as simple? I don't think I've every replaced caps in them. Both are 25X10 code.
Original PSU was faulty when it arrived. 1 - 0.63K 2 - 3 - 29.56K 4 - 13.38K 5 - 13.96K 6 - 13.7K 7 - 8 - 8.52K 9 - 10 - 20.53K 11 - 12 - 4.7K 13 - 4.7K 14 -
1st replacement PSU 1 - 8.75K 2 - 3 - 32.98K 4 - 14.92K 5 - 15.03K 6 - 15.03K 7 - 8 - 6.0K 9 - 10 - 22.6K 11 - 12 - 4.68K 13 - 4.68K 14 -
Regards. Hoffy
|
Top
|
|
|
|
|
#1942 - 07/05/15 12:52 PM
Re: DM8000HD tuner connector vdc measurements.
[Re: Admin]
|
Hoffy
Unregistered
|
Further to this, I just got a chance to test the PSU currently in the DM.
It is the later style 5L0565. 1 - 11.9K 2 - 3 - 53.1K 4 - No Value 5 - 22.09K 6 - 21.63K 7 - 8 - 9.11K 9 - 10 - 30.36K 11 - 12 - 8.22K 13 - 8.22K
This current PSU seems ok based on that alone.
|
Top
|
|
|
|
|
#1945 - 07/05/15 05:37 PM
Re: DM8000HD tuner connector vdc measurements.
[Re: ]
|
VIPF Japhar
enthusiast
Registered: 03/08/15
Posts: 218
Loc: Netherlands
|
Psu 1, 14v issue. Psu2 (2.5v) doubtful. Psu 3 seems to me fine.
_________________________
Doing nothing leads to nothing. ------------- Please note, for technical support ------------- Will be given here, or on the jb8a8f8 forum and I prefer it in English. Johnny B. Click on the banner if you like to go there..
|
Top
|
|
|
|
|
|
|