12528 Members
237 Forums
7811 Topics
24004 Posts
Max Online: 9115 @ 08/24/24 07:30 PM
|
|
|
|
13 registered (Toysoft, Admin, Smokey, haki, bobot, karimkaki15, goode men, Franco89, OMEGA, raffsif1234, didond, gerolamo, bori),
1572
Guests and
145
Spiders online. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
|
|
1
|
2
|
3
|
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
#19814 - 11/02/19 04:59 PM
DM500HD and Win7
|
stranger
Registered: 11/02/19
Posts: 3
|
Hello everyone, I need help.
After a bad upload image my DM500HD stopped working. I need a usb driver for windows 7 because it still shows that the device was not recognized.
Can you help ?
Attachments
Putty.jpg (62 downloads)
|
|
Top
|
|
|
|
|
|
#19854 - 11/06/19 05:37 AM
Re: DM500HD and Win7
[Re: Admin]
|
stranger
Registered: 11/02/19
Posts: 3
|
My colleague changed my CP2102 layout and windows don't recognize the device, but unfortunately I can't connect to dm 500 hd using Dream up programs etc. Please help..
|
|
Top
|
|
|
|
|
|
#19855 - 11/06/19 06:37 AM
Re: DM500HD and Win7
[Re: Sewi2015]
|
VIPF Japhar
enthusiast
Registered: 03/08/15
Posts: 218
Loc: Netherlands
|
As far as I remember it could be an defective U901/CP2102 This chip must be recognized when the service port is connected without powering on the box. The chip itself uses the 5v from the usb to activate. More about this, see here at jb8a8f8.com. But... It may also be a issue with the crystal Y800, or an inductor interruption near it. However, when that happens, then you should have the issue that all the connections on the back not working.
_________________________
Doing nothing leads to nothing. ------------- Please note, for technical support ------------- Will be given here, or on the jb8a8f8 forum and I prefer it in English. Johnny B. Click on the banner if you like to go there.. 
|
|
Top
|
|
|
|
|
|
#19856 - 11/06/19 09:13 AM
Re: DM500HD and Win7
[Re: Johnny_B]
|
stranger
Registered: 11/02/19
Posts: 3
|
I currently recognize the device but I cannot connect to it via dreamup or putty. I will add that the LEDs 2 and 5 light up red after buffering, which is probably good? What else can you check, I'm slowly losing power and I'm thinking about new equipment ...
|
|
Top
|
|
|
|
|
|
#19857 - 11/06/19 09:19 AM
Re: DM500HD and Win7
[Re: Sewi2015]
|
Japhar Member
Carpal Tunnel
Registered: 10/21/10
Posts: 2649
|
Try with other cables, as the USB Cable exist in version only to provide power/5V and not data. It could be that you use a wrong cable. Try also with another computer that is like Win7 or WinXP, try another USB Port of your computer as well.
As johnny told, when you insert the USB Cable into the PC (connected to the box) or vice-versa, it should detect the box (also if the Dreambox is not powered on).
Which image did you uploaded into the box (for which sim) that got your box dead ? As for sure just inserting the sim for that image, your box could get back to life. Then you can flash back a compatible image for your old sim if you want or continue to use the sim of the current loaded image. This is often the way used if the RS232/Service port is no more active in a NO CA ERROR case as this one seems to be.
TS
_________________________
DM8000, DM800se, DM500HD, DM800HD, DM7025, DM7020s, DM7000, DM500s VU+ Solo, VU+ Uno, VU+ Duo, Kathrein UFS910 Tivusat, TNTSat, Fransat, SSR/TSR, BBC1-2-3/ITV DE-OpenBlackHole 1.4 image : http://www.openblackhole.com/
|
|
Top
|
|
|
|
|
|
|
Previous Topic
Index
