NO CA ERROR - HOW TO FIX For DM800HDse box



Tutorial in PDF attached and downloadable from MEGA at : https://mega.nz/#!A65j0BqY!Pu4tRLD3bcTa1grl9RR7eKz04QOiQLiVsd_KQp0WIk8

Use the best tool based on DreamUp but universal for all Clones/Original sims, the JapharFlasher

Drivers : JapharFlasher/DreamUp Drivers

Admin

hello, I had problems with the network connector. I't replace the connector.
the image was gone. I try to to upload the image but now i get the notification :
R01: no ca found. I have a sim from japhar V210..
I have tryed to install the :
enigma2-plugin-japhar-flashing-sim-nc3-v6_dm800hdse-1.0_all.ipk
I get the next notification: INVALID IMAGE (OR OLD VERSION)
the: secondstage-dm800se-84-allsim.nfi do not work to.
What i have for options left. i know for sure that it's only a installation afther that it will work again. I do not know how? can someone help me with thia problem?
I work with a drambox clone(sunray) 800HDSE V1

Which image (please post the exact name of the file) you uploaded into the box before getting the R01: no ca found ?

Your box is not having a Japhar Sim, but a Sim 2.10 from Sim2 Team.

If we know the image you flashed that gave that error, we will then be able to give you the best way to restore the box.

Admin

hello,

this is the image:
OpenPLi 4.0 with IPTV and GStreamer 1.6.2 released !!!! November 20th
i think now perhaps is it beter to start of scatch ?
it is a japher sim. i had ordered in september 2017.
it's writen DM800HDse V1 NC3(V3-V5) as info.
i know i had then a instruction how to install the japharsim.
but unfortunately i lost it.
i do not now what to do ?

Hello,

We found that you bought a DM800HDse v1 sim (v4-v5).

You can proceed in flashing any image that is v3-v5 from DM800HDse V1 section.

If you are in NO CA ERROR, it would mean you flashed an image that is not for Japhar (Original, or from another Clone). All images Ferrari and Japhar are working. If you want to use a v6 image you should need to upgrade the OS to v6 reflashing the sim (you can do it easily with the JAM, see the topic about).

For NO CA ERROR Tutorial in PDF : http://www.ourdreambox.com/ubbthreads.ph...20DM800HDse.rar

Admin

hello,

thanks for the replay.
i have do it as you write.
i have now the image:
openpli-enigma2-7star-dm800se_Japhar_v6_wEPGImport.
the box startup now. only has problem with searching the channels.
ik looked with a satfinder device. and the cable has signal.
i thought the tuner is defective, but with other tuner is the same.
bij signalfinder optie in the menu is everything 0% en 0db
i use twin lnb. for hotbird/astra
the installed software of the tuner is the same as write on the chip.(bcm4505 or something)
or can a renew the tuner driver?

what for options i have now ?

This is normal if your sim is still on v3-v5 mode, you will have no working tuner with a v6 image.

You will need to flash the sim with the OS v6, and this can be done easily (Softcam MUST be disabled when you launch the Sim internal upgrade to v6), going into the JAM second option and selecting the DM800HDse OS v6 (0) flashing. The box will reboot 2-3 times (let it do it) and then your sim will be upgraded to the compatibility of the old v3-v5 images and the new one v6.

Admin

hello

i do not exactly understand what you wrote.

Softcam MUST be disabled when you launch the Sim internal upgrade to v6), going into the JAM second option and selecting the DM800HDse OS v6 (0) flashing. The box will reboot 2-3 times (let it do it) and then your sim will be upgraded to the compatibility of the old v3-v5 images and the new one v6.

can you please tell me in a simple way?
the jam story is for me some magic.

Ok, will try to explain with some screenshots, yes definitely the JAM reprogramming the Sim card inside the box is magics, totaly agree with you ;o). Much simpler than removing it and using a reader/programmer to reflash/reprogram the sim manually.

0) Press the Blue button when you are watching a channel, and select the Softcam settings, be sure there is no cam activated. Should be in position "none" on OpenPLi, then validate it with Green button. Example below is for DE-OpenBlackHole



1) Go to Plugin menu and select the JAM (Japhar Addon Manager)



2) Go to the second option and select the DM800HDse OS v6 (0) as on screenshot 02 and 03 below.



3) Let it do the job, it will reboot the box 2-3 times and the sim then will be reflashed automatically to the v6 OS.



You can now use any Japhar image, v3-v5 or v6.

Admin

hello,

my tv is black now with dreambox on.

what i do:
first try the blue butten. but no cam info. i go true menu
option cam/ci module. in the part cam is the notification : none.
i can not change it to disable.
second i follow the rest with the pictures.
my box display give notification:
downloading-installing (next i can not read but something with sim)
at 13:56. the box display has still this notification.
what i do wrong ? i am afraid to unplug the power.