The box will reboot at least 3 times, while programming the sim card, so you need to let it go. It could take up to 10 minutes to do the job. Generally it takes 3-4 minutes.

The box when all wil be done will reboot and the boot will go properly with the correct boot screen of the image.

TS

hello,

i can not wait. i turned the power off. en the box turn on.
now i have again notification:
R01: no ca found

now i do not know what to do anymore, sorry.
what i can do more?

Flash the image below, this is for DM800HDse v1 with Japhar Sim with OS v3-v5,

Image : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=18363#Post18363

then without rebooting flash the ALLSIM SSL

SSL : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=290#Post290

Then reboot the box and then go again on the JAM menu in Plugins to flash the sim to v6, let's hope successfully this time.

TS

Thanks for the reply.

I start the box on with the (mini flashup button)
first i get the notification: no ca or image. After that
comes bios no ca found.

I can no image uploaden. what i do wrong ?
normal start it gives de notification R01: no ca found.

The mini-flash button on the back will be usable ONLY with the sim that was in the box when the box was bought. If you want to use that mini-button, you need to replace the Japhar sim by the old sim.

If you don't have anymore the old sim, you will have to use the JapharFlasher to initiate the flashing using it with the two cables, RJ45 + Mini USB cable.

You will then have to do as explained above by TS, flashing the image and just after (without reboot) flashing the ALLSIM SSL.

This done turn off the box and you can put back the Japhar Sim. Then boot the box, and apply thru the JAM the OS upgrade to v6.

Admin

hello,

thanks for the answers,
i have installed the image and the allsim.
start up the box and install the OS V6 sim
afther instal the V6 sim the box stayed blank in the display.
i turn of power afther 30min. then the box starts up for 3 times.
afther that the box start normal. but now i can not searching channels.
the tuner is empty.
what i can do more ?

Flash the Japhar image OpenPLi, below, then check if you have the tuner with it,

Image to flash : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=20678#Post20678

and try to watch for example the IPTV FTA channels "Company TV", it's the 4th on the list.

Admin

hallo,

i flashed the openpli. box at onces give R01: no ca
afther turn on.
i think that os V6 difficult is for my box?
it is strange for me why it not work with me?
what i can do more ?

Is your sim in that box a Japhar sim ? If it's a Japhar Sim, it would do this if the sim is not programmed for the DM800HDse v1, or if the sim was not properly programmed. If it's not a Japhar, then it will naturally give this error of wrong sim.

So if it's a Japhar you can always flash the box with the image below again,

Image : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=18363#Post18363

then without rebooting flash the ALLSIM SSL

SSL : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=290#Post290

Turn off the box and then insert the old sim in the box, take the Japhar and insert it (with the sim plastic it came with) in the correct frontpanel slot and have it flashed with the JAM second option (in Plugin), at the end of the list you will have the FrontPanel Flash DM800HDse v1 v6 (up or down slot, put it right with chip first looking down).

You need to read what the software shows on the screen during flashing of sim to be sure to know what is happening (take a photo and post here so we can read the messages during programming of the sim).

TS

hello,

i do exactly what you write. first image then the ssl all.
old sim in the box and the japhar in front. i put the sim in the
lower sim card holder. when i want flash it stoks(see picture)
i look inside de sim card holder, in the lower are no contacts.
in de the uper the card not fit. the frontpanel dissamble else
i can not put the sim in it(see picture) the card is skewed in de
sim card holder. after flash i get no errors(see picture)
at last it is oke i think?
What i can do now?