The box should now reboot (as you see you have at the end of the command the "reboot" command).

And the DM920UHD should be in "normal" mode now, and no more in "rescue" mode.

Admin

Respected Sir,

Again, by pressing the red button for few seconds on the front panel shows "Rescue Mode waiting for DHCP"

Could you please guide me what is the next step.

If you press the frontpanel boutton when you turn on the box it WILL ALWAYS go in RESCUE MODE... what do you expect it else to do ?

TS

Respected Sir,

I need to flash the below latest image into DM920UHD

dreambox-image-deb-dm920-20200526.tar.xz

Previous images was flashed via "Rescue mode http://dm920.local.lan/"

Thanks

The rescue mode is set to flash an image, so if you press the frontpanel button it's for flashing an image.

Then once you have the address IP or dm920.local.lan, you flash the image with your browser (Chrome, Explorer/Edge, Firefox, Safari etc).

Read : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=15307

Admin

Respected Sir,

1.) If front panel of LCD displays
"Rescue mode http://dm920.local.lan/"
Then I can copy http://dm920.local.lan/ in the browser & flash the latest firmware.

2.) Now My dreambox dm920 displays
"Rescue mode - Waiting for DHCP" by this message I will not be able to flash the latest firmware.

Please suggest.

If it waits for an IP from the DHCP, check your network and cabling... as it means the box doesn't communicate with your Router/Modem. You can always reboot your modem, generally it fixes bugs and problems as you have. As the problem is due to your network and box not connected to it... not the box itself.

You have a network problem. The "Waiting DHCP" is normal, as it requests from your modem an IP address, and waits until your modem gives one to it. It can take various minutes to obtain it.

Admin