unconsciously flashed an image, was not supported by Japhar SIM.
Is there a way to overcome this issue ?
I explored the forum and found a tool for DM 800HDse v2.
can that tool work on v1 as well?

You can reflash the box with the correct SSL (don't need to flash the full image), with the JapharFlasher tool (same as DreamUp but it works with all boxes and sims).

JapharFlasher : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=9476

Tutorial to fix NO CA ERROR on DM800HDse : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=15214#Post15214

Admin

THANKS a lot for so quick reaction ..much appreciable
will have a try if I could succeed to install CP210x_VCP_Win_XP_S2K3_Vista_7_JapharFlasher in my PC ,port 8 is not being detected as I had tried many times to confiure in Windows10 64bit environment.

update:
all is done well ...thanks a lot dear Admin for your great/prompt support

Helloo all !

I encountered a problem when I changed the firmware on the receiver, I get a .... bios : no ca found, OpenPLi_4.0_Japhar_DM800HDse_wIPTV_BetaV7_TripleTuner-OS. Was installed, it worked very hard.

I installed OpenATV5.3 - ( possible for sim 2.10 ) I wasn't careful, I was wrong. How can i solve the problem , without using sim 2.10 ?

You have to fix the box back to Japhar, with the tutorial you can find on the link below,

JapharFlasher :
http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=9476

Tutorial to fix NO CA ERROR on DM800HDse :
http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=15214

Then use only the images from the Japhar section,

DM800HDse Images :
http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=48&page=1

TS

Hi All !

I kept trying to solve it, now I notice that I get R01 : no ca found .
I no longer understand anything , can I solve the problem with sim Japhar in the receiver ?

Yes, you should resolve the problem with the Japhar Sim.

You will need to use the JapharFlasher connected with a USB Cable to the box (to Service Port) and the RJ45 to your Router.

You will have to flash the correct SSL for the Japhar Sim (if there is a Japhar Sim in the box).

Read Tutorial : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=15214

Admin

Hi all !

I succeeded, I have a small problem, on some firmware the tuner does not see.

What firmware do you recommend ?

Which sim is in your box and which image did you flashed (please give the exact link/Filename). So we can check your exact situation.

TS

Hi Toysoft !
In the DM800se V1 receiver is Japhar NC3 sim .
Many firmware does not work well, crashes, or does not see the tuner .
These firmware did not work for me:
> openatv-6.1-dm800se-20170617_Japhar_v4-BETA , he doesn't see the tuner

> openpli-enigma2-7.2star-dm800se_Japhar_v6_GStreamer_1.17.0.1_20200417 , after install wifi driver crashes

> OpenPLi_4.0_Japhar_DM800HDse_wIPTV_BetaV7_TripleTuner-OS-SSL84J , the receiver is locked

Can you help me with a quality firmware ?

thanks in advance !!!

Ok, first there is 3 different OS for the Japhar DM800HDse v1.

- v3-v5 (before 2019, Kernel 2.6 but will lock and Kernel 3.2)
- v4beta (that was ONLY for test and there is images on that section only, and v6 is NOT compatible neither v3-v5 with the drivers of this image. It's normal you have no tuner if your sim is not using v4beta OS.
- v6 (since mid 2019, support latest drivers for Kernel 3.2)

If you install the latest OpenPLi 7.3star, let me know how it goes, do you have the bootlogo and do you see the tuners ?

Install image : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=22045

Admin

Hi Admin !

In the meantime I installed :
openpli-enigma2-6++-dm800se_Japhar_v3-v5.nfi, it seems OK.

I will also install :
openpli-enigma2-7.3star-dm800se_Japhar_v6_GStreamer_1.17.0.1_20200924

Hi all !

I have a problem , in the morning I found the receiver malfunctioning , he no longer received any orders .I tried Japhar Flasher ,load something then tell me " upload completed ,waiting for acknowledge " he stays here for a long time without solving anything .

Are you sure the PSU is valid and functioning ? It's a plausible cause.

TS

I will try to change the power supply.