Hi Guys,
Hope your ALL having a nice week-end?

OK I wanted to upgrade my DM800se from oPli4 to latest new oPli7.3Star.
1) Turned OFF Softcam
2) Upgraded my SIM with JAM to v6
3) Waited until 2x Boot finished.
4) Loaded this File
openpli-enigma2-7.3star-dm800se_Japhar_v6_GStreamer_1.17.0.1_20200714.nfi
5) Configured my Tuner.

Everything was OK, I loaded my Setting back via "E Channelizer".
BUT all I get is "Tune Failed" error message on Screen.
So what happened?
Did I do something wrong?
please see attached Pics,

Thanks for any suggestions.
AJP

Are you sure you flashed the DM800HDse v1 OS v6 ?

As if you have no tuner... it's because you loaded a v3-v5 OS into the sim...

Also remember that once you upgraded the Sim to v6, you don't need again at every image update to reflash the Sim OS to v6... it stays v6.

For me you just flashed to an older OS, and not the v6 if the Tuner is not recognized, as new images use new drivers that only Japhar Sim v6 OS will work with (The Tuner is detected, but you have no video/stream from DVB if you use an old sim OS with the latest drivers from December 2015).

Admin

OK,
I tested with the openvision Image as directed here;
to Test if SIM update was successful and YES looks like I have v6 now.
BUT still getting Tuner Failed/Tunen Fehlgeschlagen.

see Pics

Can I go back and Load previous Image on to this SIM v6,?

OK thanks for reply Admin I will try again to change to v.6
But first I have to load a JAM Plugin this openvision has NO Plugin.???

Thanks
AJP

The Japhar OS v6 is backward compatible to v3-v5 (For DM800HDse V1).

But to what you show, you definitely flashed a v3-v5 and not a v6 into the Sim... check again.

Admin

I took this version SIM v.6 like in Pic

OK Thanks Guys the second time it has been successful on the openvision Image.
NOW I have v.6
Will Flash openpli 7.3Star v6 again.
Super result as usual.
AJP

Yes any of the v6 for your box, and you will not need to reflash again the sim, once its already v6.

Admin

NO Guys,
I spoke too early,
UPDATE
*********
After Flashing openPli7.3Star back to Tuner Failed
IT has also changed my IP address for this BOX.
This is crazy what is going ON?

Update
*********
OK I will do everything again.

AJP

Its normal the IP changes as every OS file has its own MAC.

Turn off completely the box and boot to see for the tuner... and check the dish cable on the back of the box as it could have moved.

Admin

NOW Green Screen crashes,
when installing Skin
This Skin " Skin-Turbo-MOD-By-RAED " this is getting very annoying now,
nothing is working.
What a disaster.!