Dear,

I have Japhar Sim NC3 in the DM8000
After flashing to V6 have I next error
Error 1 NO CA FOUND

I did a reflashing with the 2nd stage but stil the error
Win10 - usb Serial Null Modem Cable
JapherFlasher , see the attachted file

Rgds,
Kurt

Hello,

Can you give us your VIP number, so we can check which sim was sent to you.

Then before installing the Japhar sim you will need to flash with the older sim the new Japhar Image you find on link below. This done, you turn off the box and replace the sim inside (below of HDD).

DM8000HD Japhar : http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=52&page=1

It should work immediately, if you have the sim properly installed and properly initialized for your box. So we need to know which sim you ordered thanks to your VIP Number to check this.

TS

Dear ,
I bought this DM8000 2ND Hand a week ago , I don't have a VIP nummer, but I open the DM8000 and remove the HDD I saw the Japhar Sim NC3

I don't hava another Sim, Only the JAPAHAR SIM
This Sim was already installed .

Its a 2nd Hand DM8000

Ok, then flash the image with JapharFasher (as you done above on your screenshots), I think you are using a RS232 cable (you need a PC with real RS232 port), and RJ45 connected to Router/Modem.

You will have to flash the SSL84J, and then reboot the box and flash normaly an image from link below.

SSL84J DM8000HD : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=365

Images Japhar : http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=52&page=1

JapharFlasher : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=2012

TS

So, I have next result after flashing with "Second stage DM8000 84 allsims

But still not Ok , see my attachments, DM doesn't boot 100%

Rgds,
Kurt

See attachment

Good news, you have mostly fixed the problem. There is no more NO CA ERROR, that is the first step.

Next step is to install the OpenPLi image WITHOUT flashing after the ALLSIM or SSL84J. So just flash the image alone and reboot.

If you have no Video during boot (the openpli blue background and flour), then it means the Sim is still at v3-v5 and not v6.

But please just flash the Japhar Openpli image and reboot and let us know what happens.

Admin

Dear,

How can I install the OpenPli Image whithout flashing?

Br,
Kurt

Without flashing the ALLSIM or SSL84J after, just flash the image.

Admin