Just install it, it will work, and if you are happy of the image to have it to work at the best, just then order the new sim Japhar from http://www.japhar.com/japhar/

The image above works fine for BOTH, Japhar and Ferrari... but it's better for future support to have the Japhar installed. So if you are happy and it works well, get the Japhar then.

Admin

hello! im new to this forum i read the postes here about RT5370 wireless adapter from railink. i have it too and i installed this firmwire that was posted here, but it doesnt work. it finds the adapter but cant find any network or connect to any.... somebody have any ide how to get RT5370 to work with Dm500 hd open pli image?

If you install OpenPLi from Jole, you will be able to run the RT5370 (without the need to install any driver, as it's already pre-installed), but you will need to remove from the drivers section the RT7777 file, the RT5370 will then work instead of the RT7777. On Jole911 image there is both, RT7777 and RT5370 pre-installed.

/lib/modules/2.6.18-7.4-dm500hd/kernel/drivers/net/wireless

Admin

Sometimes it works, for OpenPLi 4.0,

Check this,



Admin

Hi,i have a TP-LINK TL-WN725N v2 (Realtek RTL8188EUS chip) and DM800se clone with Nemesis_2.6_SVN-112r3_dm800se-Japhar_SSL84J_April23
Have a driver for this usb wlan stick?

It should be updatable thru the normal Nemesis Feeds, see their forum naturally not telling you have a clone box ;o) as they really dont like it (risk of ban).

http://www.nemesis.tv/forums/forum.php

http://www.nemesis.tv/forums/forumdisplay.php?59-DTT-DECODER

http://www.nemesis.tv/forums/forumdisplay.php?114-DM-800se-HD-PVR

Admin

If someone can help!
I have wifi dongle ID 148f:5370 Ralink Technology, Corp. !
I try to connect my DM800SE ferrari (Dream Elite v. 3.0, ssl87f oe 1.6) to my wifi router with no success! I have installed driver "rt5370sta_2.5_dm800se-mipsel.ipk" ! My wlan config menu appear and I scan and find my network but it won't connect. I try every possible config : open , DHCP on/off etc... but no luck!! Please help!!

You have 3 options,

- Set your network to WEP or to Open, and see if it works.

- Move to OpenPli 4.0 IPTV for Japhar, as your dongle is supported fine.

- You can also use Jole911 images, these generally work with RT5370 (in that case remove from the image the RT7777 driver in /lib/modules)... or get an RT7777 from http://www.japhar.com/japhar/ that works on this image for example : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=1224#Post1224

Admin

Thanks to admin for suggestions!!

Just a question. Can I move to Open pli 4.0 with my old ferrari sim and louder ssl87f or I have to replace the sim with Japhar sim??