yes I see.
Thank you for look. I wait 👍

Ok, I got my RT3070 ID 148f:3070 load to dm800se:



lsmod reply:



The problem is that it cannot connect by WPA/WPA2, it runs only with no encrypted wifi.

I tried with these:

https://forums.openpli.org/topic/19046-dm800-wifi-lan-strange-behaviour/#entry208723

and

https://forums.openpli.org/topic/60364-zgemma-h9-wifi-encryption/

but not helped.

I also read a old post of @gdk1 :



but I cannot find the config.mk file

What is the name of your Wifi WPA2 network ? As at what I remember, it needs to use only small caps, and not big letters to be compliant and so compatible.

Eg : "Wireless" will be not compatible, but "wireless" will work.

TS

I have small caps SSID, not working.
It works only with WEP but use wep (in)security its a bad idea.

Waiting for someone which find the solution

Can you do the checked as explained on this post ?

https://www.raspberrypi.org/forums/viewtopic.php?t=161923

And let us know if there is something you find out ?

TS

-----------------

Are you sure the PSK was typed properly?
Have you set the WIFI country?
Have a look at wpa_supplicant.conf

sudo nano /etc/wpa_supplicant/wpa_supplicant.conf

It should look something like this:

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
country=US

network={
ssid="your ssid here"
psk="your psk here"
key_mgmt=WPA-PSK
}

Remove any duplicated entries (failed attempts).
Note you can connect both wired and WIFI at the same time and even use them concurrently.

Here is my wpa_supplicant.conf file.

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
country=US

network={
ssid="jesljy"
psk="xxxxxxxxxxx"
key_mgmt=WPA-PSK
}

network={
ssid="iptime"
key_mgmt=NONE
}

The second entry is the one for the open wifi AP that I was able to connect to. That was added automatically, I guess, when I connected.

There are/were no duplicated entries for any of the failed attempts to log into the router. I'm not sure, of course, but could that be significant? Not only am I not connecting, but I'm not getting the OS to record the attempt?

Should the configuration file show WPA for both WPA and WPA2? The router uses WPA2.

The password for the router is alphanumeric, lower-case letters and numbers only. No special characters.

I'm using AES encryption. Should it be TKIP even if that's not optimal for security?

According to other posts in this forum, for WPA2 and AES you need this

network={
ssid="myssid"
psk="mypasskey"
proto=RSN
key_mgmt=WPA-PSK
pairwise=CCMP
auth_alg=OPEN
}

I'm using AES encryption. Should it be TKIP even if that's not optimal for security?

According to other posts in this forum, for WPA2 and AES you need this

network={
ssid="myssid"
psk="mypasskey"
proto=RSN
key_mgmt=WPA-PSK
pairwise=CCMP
auth_alg=OPEN
}

TKIP is the older standard. If using TKIP only then I believe pairwise=TKIP is needed.

My router is set to AES (CCMP) and it just works with the wpa_supplicant.conf which I posted in the 2nd post above.
My wpa_supplicant.conf is the default as generated by the GUI config tools for PSK and WIFI country.

Hi Toysoft,

thank you for reply, today I see your last post.

Anyway I solved by myself.

So, to make RT3070 ID 148f:3070 drivers load to dm800se (japhar feeds):



and to make WPA/WPA2 run:



Case closed

Well done, and THANK YOU A LOT for posting your solution, that I am sure will help a lot of members.

MERCI from all the Team !

Admin