12363 Members
237 Forums
7861 Topics
24145 Posts
Max Online: 9115 @ 08/24/24 07:30 PM
|
|
|
|
3 registered (Toysoft, Admin, Hum@xel),
2118
Guests and
479
Spiders online. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
valentin: hi, a little help who is available?
Admin: Do a post in the forum
fon: I am trying to buy sim card from website but i am getting no shipping method has been selected. i am inserting correct shipping address and country
Admin: It's fixed, Thank you to have informed us and explained where it was faulty. Now it should work. Thanks
Admin: For DM800HDse Tool to fix problems, check on Japhar images section, for JapharFlasher
Thor: How do I use this stuff can it run on mobile devices.
Hum@xel: Hello @ll sat friends have a nice evening 
|
|
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
|
28
|
29
|
30
|
|
|
|
|
|
|
|
#23758 - 08/15/21 11:11 PM
Re: How to Flash OpenPLi on DM520HD through USB
[Re: Athar H. Tanwri]
|
stranger
Registered: 08/15/21
Posts: 1
|
I have to clear above method, as I have now used it for several times.
Flash any image on Dreambox (DM520, DM900 and DM920 etc), I explain here for DM520
1- Format USB with Fat-32
2- Label usb "DREAMFLASH"
3- Copy image to USB Drive
4- Rename image "dreambox-image-dm520.tar.xz"
5- Insert USB to receiver
6- Now from standby menu select Recovery Mode
or Shut Down your receiver and then press and hold touch button of receiver
or from telnet give any one of below commands
to-the-rescue
or
echo "rescue" >> /proc/stb/fp/boot_mode
reboot
Note:
If receiver is on red light then first Power Off your receiver from rocker switch.
Then power on your receiver and touch and hold front touch panel within 500 ms to bring receiver into Rescue Mode
|
|
Top
|
|
|
|
|
|
|
Previous Topic
Index
