i have 3 original v2 boxes with chips no sim .

sometime ago i put a sim socked in one , got a japhar sim . put on openpli-enigma2-7.2star-dm800sev2_Japhar_v6_GStreamer_1.17.0.1_20191220
all ok

some weeks ago , got another japhar sim , and a socket , solderd it in put in openpli-enigma2-7.2star-dm800se_Japhar_v6_GStreamer_1.17.0.1_20200526
it did not boot , stoped at the dreambox picture , tried everything ,solderd wires with chip , chip back etc . til it did nothing not even
no ca . messured the sim socket . solderd the chip back that works

today the next one , solderd socket in . japhar sim in it .put in openpli-enigma2-8.0star-dm800sev2_Japhar_v6_GStreamer_1.18.3_20210611 ,
boot to dreambox picture , no more . put in got the other japhar sim out the working V2 . put it in : the same result ,boot to dreambox picture .
Put the chip back . that works . the sim out the box works in the other box .

Thats it , day's of work got me back to the start .

Ad

So one of the 3 worked, and the other two not.

Can you check the MAC / Serials / Date of Production of the 3 boxes ? They could have added something to the Rom Boot...

Admin

info files
the 2 not working
the one working

Which one working ?

00:09:34:2F:74:2C (15496)
00:09:34:2F:82:32 (16096)
00:09:34:2F:03:33 (09828)

In our side, the one we tested that is working is,

00:09:34:2E:B3:D9 (02816)

Admin

00:09:34:2F:03:33 (09828)
this one is working .

If you need it i will send you
00:09:34:2F:82:32 (16096)
I will pay for sending and return .

Now the chip is in it .

I am busy with satellite stuff 30 years now .

Ad

I think we can work out some solution like for the DM7020HD, and the Japhar sim will work with your box.

I think we need to clone the MAC of your Original, and use it on the Japhar OS for that exact box. So we will need to generate the 2 OS for your two DM800HDseV2 boxes, so you have a Japhar Sim backup for each of them.

Contact me by PM,

Admin

I gave it a last change , tried half a day , no luck .
Soldered the chip back but that is not working any more also .
Perhaps to much soldering . changed it 10 times or so .
Tried to flash several images , also boot images , about 30 times or so ,but nothing .
2nd failed . it does not seem to flash boot . it sticks at 87. That is what dreamup puts on it i think .
Optiflasher i am not gonna use , what a rubbisch support .
I tried 2.0.0.9 some times but no go . i would not use it if that was the last program i could use .
Its is sort of bricked .

I think boot flash failes , is the boot programm on the sim/chip or on a chip on the motherboard ?

Thanks for your help .

Regards

Ad

You can use the JapharFlasher 1.1, that one is supporting as well the DM800HDseV2.

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=9476#Post9476

Also are you sure you used the right Japhar Sim with the right MAC address that is destinated to the box (it must be the same MAC as the original chip).

Admin

Tried everything of corse also Japharflasher . i can flash it , it does what it has to do ,
but it does not change the boot program ,nothing changes .

Ad

if I flash original software ,in original chip it should work with dreamup
But no . no ca error .
Flashing just does not put the bites in memory .

Ad