No wathever i flash ,
newnigma2-ipk-weekly-dm800sev2-17_10_2021.nfi ,
secondstage-dm800sev2_allsim.nfi,
openpli-enigma2-8.0star-dm800sev2_Japhar_v6_GStreamer_1.18.3_20210611.nfi
secondstage-dm800sev2-89.nfi
,dreambox-image-dm800sev2-20170216.nfi.

Boot loader does not change .
It never comes in normal flash mode .
Only with Japharflasher , not with dreamup DreamUP_1_3_3_12 also
When flashing in browser you see the same bootloader

Ad

This is the topic, where you have the SSL89J,

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=18335#Post18335

File : secondstage-dm800sev2_SSL89J_v6.nfi

Then flash v6 images that you find here,
http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=49

Admin

What ever i flash it does not stick . these files used to work ,i have 3 800V2 boxes .

Ad

The ALLSIM SSL87J will not work with drivers, and be sure you install on each box the Japhar Sim that has the same MAC address as the chip that was on it before.

You must flash the one I told you, secondstage-dm800sev2_SSL89J_v6.nfi then a Japhar image v6.

Admin

I think i found the problem .
One last time i put the box together and dicided to try some flashes.
And i got it working again with the chip .

The problem is , i think , that the flashing does not work ok ,with Japharflasher 1.1 it workes with boot 87 , and that connot flash a V2 .
But if you have other software than original Dreambox , DreamUP_1_3_3_12 wil not work .
You need 89 to program V2 .
So i programmed some software for original chip , newnigma and openatv , with that it still would not go in flashmode .
But DreamUP_1_3_3_12 worked now , so i programmed newnigma , then it was possible to get in flashmode the normal knobs way , i flashed openatv ,
i like that more , because it is closer to pli to make . And ok .

Flash Japhar before you put the simcard in , might work but i think i did that , once or twice it started up , but not al the way .
I ame not gonna try again , i have enough for the rest of the year , and for sure not with these 2 boxes .

Perhaps if i get another V2 !!!

Regards

Ad

Use, secondstage-dm800sev2_SSL89J_v6.nfi

For the DM500HDv2 and DM800HDseV2, there is only the SSL88 and SSL89.

Admin

If I were to do it again , I would first remove the chip and place the SIM card .

Then with DreamUP_1_3_3_12 , which should work now because original software is present,
I would install Japhar software.

If you first install the Japhar software with the browser, you do this without the Japhar sim present
, that could make a difference . And you can no longer use DreamUP_1_3_3_12 .

DreamUP_1_3_3_12 is not difficult to use, only the driver for the Dreambox is difficult to find .

Regards

Ad

Nope, you should first keep the chip and flash the Japhar image with SSL89J.

Then only after replace the chip by the Japhar Sim.

The point here is that the SSL89 is not accepting to flash the older SSL (that is only the SSL88). So once your original box has an SSL89, you must only flash an SSL89 or SSL89J (as well as image needs to contain it, or you flash the image and immediately after flash the SSL89J, then only reboot the box).

TS

That did not work . twice .
You get it boot up but than only black screen , it does not go all the way .
I think you have to get a image that works with the chip and has 89 .
You have to flash it with DreamUP_1_3_3_12 , flashing with browser does not work .
The boot 89 in an original image , wich you use with the brower does not flash the jahar image ok .
it does not flash the boot .
I think that only DreamUP_1_3_3_12 flashes the images right .
I did some 40 different flashes on 2 v2 boxes solderd the chip in and out 20 times or so .
This is all i come up with .
But have enough of it now , it works now with openatv , the motherboards do not survive more soldering ,
had to fix one bypass already .

Did you ever put a japhar sim in a V2 ?
I have some 15 Dreamboxes 800 ( friends , family , holiday homes, give them away )
and 4 Formuler F4 turbo (and some 15 tuners in the loft , am crazy ) so not all the way a beginner . And make mistakes .

My first V2 went well , these 2 should not be a problem .
See if can find another V2 , not easy , sellers don't even know they have a V2 , the remote is the indication .

Regards
Ad

Yes, replaced the chip in an original DM800HDseV2 by the Japhar, didn't needed the same MAC address... on DM7020HDv1 the MAC address on Japhar Sim must be same as on the original Sim/Chip.

Admin