USB2.0 Smart cardreader, work with dreambox,VU+,reelbox or other linux dvb receiver,support cccam ,oscam,newcamd.....



MAIN FEATURES:

The SmartReaderPlus is a USB smartcardreader / programmer based on a powerful ARM core processor. incorporates an integrated USB to Serial converter, which enables the Smargo SmartReaderPlus to work with all standard Phoenix compatible Linux and Microsoft Windows applications. Powerfull ARM 91 Processor...

- High-performance 32-bit RISC Architecture
- High-density 16-bit Instruction Set
- 64 Kbytes, organized in 512 Pages of 128 Bytes (Single Plane)
- 16 Kbytes Internal High-speed SRAM, Single-cycle Access at Maximum Speed
- Low-power RC Oscillator, 3 to 20 MHz On-chip Oscillator and one PLL
- Supports 3.20, 3.43, 3.69, 4.00, 4.36, 4.80, 5.34, 6.00, 6.86, 8.00, 9.61, 12.0 and 16.0 MHz for smartcards.

- Supported by standard drivers for Windows and Linux
- Developer guide available.
- Works on all Dreambox Models with USB connection.
- Can be cascaded with more SmartReadersPlus using an USB Hub.
- No power supply required.

Drivers needed to be installed, and setup to Phoenix mode

For old DM7025, but you will have the same modules also for newer enigma2.

* ipkg install kernel-module-ftdi-sio_2.6.12.6-r7_dm7025.ipk
* ipkg install kernel-module-usbcore_2.6.12.6-r7_dm7025.ipk
* ipkg install kernel-module-usbserial_2.6.12.6-r7_dm7025.ipk

opkg update
opkg list | grep ftdi
opkg list | grep usbcore
opkg list | grep usbserial

OpenPLi 7.2Star DM800HDseV1 :

root@dm800se:/etc/opkg# opkg list | grep ftdi
kernel-module-ftdi-sio-3.2-dm800se - 3.2-.1 - ftdi-sio kernel module
ftdi-sio kernel module; USB FTDI Serial Converters Driver
root@dm800se:/etc/opkg# opkg list | grep usbcore
root@dm800se:/etc/opkg# opkg list | grep usbserial
enigma2-plugin-drivers-usbserial - 1.0-r0 - enigma2-plugin-drivers-usbserial version 1.0-r0
enigma2-plugin-drivers-usbserial-dbg - 1.0-r0 - enigma2-plugin-drivers-usbserial version 1.0-r0 - Debugging files
enigma2-plugin-drivers-usbserial-dev - 1.0-r0 - enigma2-plugin-drivers-usbserial version 1.0-r0 - Development files
kernel-module-usbserial-3.2-dm800se - 3.2-.1 - usbserial kernel module
usbserial kernel module; USB Serial Driver core


OpenPLi 8xStar DM8000HD :

root@dm8000:~# opkg list | grep ftdi
kernel-module-ftdi-sio-3.2-dm8000 - 3.2-r14 - ftdi-sio kernel module
root@dm8000:~# opkg list | grep usbcore
root@dm8000:~# opkg list | grep usbserial
enigma2-plugin-drivers-usbserial - 1.0-r0 - enigma2-plugin-drivers-usbserial version 1.0-r0
enigma2-plugin-drivers-usbserial-dbg - 1.0-r0 - enigma2-plugin-drivers-usbserial version 1.0-r0 - Debugging files
enigma2-plugin-drivers-usbserial-dev - 1.0-r0 - enigma2-plugin-drivers-usbserial version 1.0-r0 - Development files
kernel-module-usbserial-3.2-dm8000 - 3.2-r14 - usbserial kernel module

- In Phoenix Mode
cardreader_phoenix: yes
cardreader_internal_sci: yes

- In Smartmouse Mode
protocol = mouse
device = /dev/ttyUSB0
or
protocol = smartreader
device = 006:002