JapharFlasher 1.1 by GoodSat that supports DM800HDseV2, DM500HDV2 and DM7020HD.

https://mega.nz/#!7c4RDSBR!tHuDF-84p1L_VYcCLK2FMiZauIQTBL9uQievaNpLq4U

Drivers for all platforms, https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers

Admin

Thank you for this new flash 1.1

I have a number on dm boxs so it will be very usefull.

Regards Talks.

Yes, it works with all the DM boxes, Clone or Originals (all clones), you can then flash the ALLSIM SSL84 from the Japhar Sections (for each box you have one SSL ALLSIM) that will work with all boxes (Originals/Clones). You can recover all boxes this way.

Then when you next need to flash an image, just be sure of the Sim inside to flash the right image for the sim. Naturally then the best is to swap to is the Japhar ;o).

Admin

Thanx to ToySoft for directing me to the right place... and to the necessary reboot of my PC, after the drivers did not install the first few times around, plus a bit of exercising of my little grey cells... After a bit of wrangling - I succeeded... This really does work, unlike the previous versions I tried long, long ago, when I was stuck in a similar fashion...

So, I recovered my F500HD, thanx also to somebody saying to untick the "LAN/Network" box in the Flasher GUI, i.e. to have the cable plugged in (possibly to detect the box) but not to use the network to flash it, I suppose...

The flashing is done by a mini USB cable, I presume and it is slow - but it worked!!! BRAVO, whomever wrote that! I is 'appy clappy chappy now, having my special box back!

One must install the drivers first, then the flasher starts, and if it can't connect - restart your PC, unplug everything USB-wise, try again. It worked in my case.

The trick was to retry: direct the reinstallation of drivers by choosing the C partition, then it found the drivers and then it all worked as described above!

I managed to flash my F500HD with PurE2 from this cool forum, then I deleted a few things (Blindscan, Cable etc.) and mounted my USB stick.

I restarted and I INSTALLED THE OPEN MULTI BOOT (OMB) PLUGIN from the feeds. I.e. IT IS POSSIBLE to have OMB installed!!!

Now, let's see if I can remember how to install images in the USB stick via OMB...

I would like to send my appreciation for this aswell. Just like others I tried several other tools with no joy. This one fixed my old DM800HDse

We are very happy that this sorted out your problem,

Enjoy.

TS

marche pas pour dream 7020hd

Marche tres bien le JapharFlasher v1.1, et meme utiliser le DreamUp original...

Sinon, en remplacant la sim par une Japhar, avec os DM7020HD, et reflashant le SSL original, c'est bon.

Donc il y a plein de solutions.

Admin

la sim pouvez vous me envoye rle lien et le tuto je suis toujours au point mort la dream toujours en error que serial quand je mets dremup
merci ami

Elle est disponible ici.

Ebay : https://www.ebay.fr/itm/173933570010

et ici,

Notre eshop : http://jam3.japhar.com/japhar/index.php/product/japhar-dm8000hd/

Admin