My great thanks to u and ur team my VID/PID is 148f/3572.
but the driver of rt3572 not work nor rt 2870.but when i installed open pli 3 for dreambox 800se sim 2.10 the
driver worked soo good.but the tune failed as there is no patched driver for dm800se ferrariboot 84f.

On open pli the diver was rt 2800 and worked soo good.but for driver 3.2. So i need the driver of 2800 for 2.6.18-7.4-module.

Try this one, from post below, named : wifi_1.0a_dm800se.ipk

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=242#Post242

Admin

P.S.: But the best would be to swap your sim to the new sim Japhar that will support the latest images, so you will have no more problems with Wifi drivers.

hello i would like to ask for help i searching over google tons of forums registered everywhere i cant make any dongle to work on my DM500HD Ferrari Sim i will post full info here if someone can help me to try make it work i will be gratefull i use newnigma2 3.3.2 :

T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=148f ProdID=5372 Rev= 1.01
S: Manufacturer=Ralink
S: Product=802.11 n WLAN
S: SerialNumber=1.0
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=450mA
I: If#= 0 Alt= 0 #EPs= 5 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms


also i got onother wifi dongle TL-WN823N RTL8192CU chipset somehow i manage to make it reconize in the network but soon as i press adapter settings it crash all the newnigma green screen and restart in 10 seconds ... sorry for my bad english thanks upfront for any help


also uname -a

Linux dm500hd 2.6.18-7.4-dm500hd #1 SMP Tue Mar 27 08:48:34 UTC 2012 7405b0-smp GNU/Linux

Give us also the informations about your second Dongle with PID:VID,

Admin

P.S.:
About the first one : I don't find any for the 5372 into a DM500HD. Try the one attached.

About 2nd : Try
rtl8192cu_3.3.0-r6.2_dm500hd.ipk
and
rtl871x_2.6.6.0-r6.2_dm500hd.ipk

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=333#Post333

thank you very much i tryed with the RALINK driver with rt5370sta_2.5_dm500hd-mipsel.ipk its now working its showed in the network that i have instered USB DONGLE but soon as i enter it and press adapter setting again green screen and restart after 10 seconds it wont activate the dongle soon as it start its crashing same as the second dongle its showed in the network everything good but soon as i try to active it its crashing but still i got PID AND VID maybe you could help me more or tell me do i change the newnigma2 to openpli or any other software maybe it wont crash ... because its impossible drivers to be loaded and soon as i try to set it up to crash ps : PID AND VID FOR THE TPLINK

T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=8178 Rev= 2.00
S: Manufacturer=802.11n
S: Product=USB WLAN
S: SerialNumber=00e04c000001
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl8192cu
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=125us


thank you alot you are the only person that helped me the best way now but im still gonna search to find out why its crashing the newnigma2

Yes, try with these drivers but on OpenPLi image, you have much more chances that it works.

You can also try the image OpenPLi 2.1 with RALINK RT537x built-in, on link below, all is ready and could work directly.

https://mega.nz/#!BcVU3abC!1rNh8oJZudKsrURsF6PHbalxmg3EAB_cecLyC3Mg0m8

Admin

thank you very very very much i manage to make the TPLINK dongle work but the problem was in the newnigma2 its crappy but when i installed openpli + the drivers you gave me the TPLINK worked the RALNIK worked reconized but when i press to scan does not find any networks im trying now to find the rt5370sta_2.5_dm500hd-mipsel.ipk but for dm800hd se for the original dreambox i got but thank you alot for the great support im very gratefull

The file above from MEGA works fine with the RT537x, I installed it on my DM500HD... so try it without installing again the drivers as the drivers are already installed for the RT537x.

Admin

i understand you but my dreambox ferrari dm 500 hd is the old ferrari sim its not the new and it have ssl87 i need to get the new sim or something somehow someone need to guide me with that and i installed openpli from other forum that i know its working with my dreambox ferrari sim not that i do not want to install your image