12528 Members
237 Forums
7811 Topics
24004 Posts
Max Online: 9115 @ 08/24/24 07:30 PM
|
|
|
|
14 registered (Admin, Toysoft, OMEGA, tomash, Smokey, haki, bobot, karimkaki15, goode men, Franco89, raffsif1234, didond, gerolamo, bori),
1551
Guests and
146
Spiders online. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
|
|
1
|
2
|
3
|
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
#4092 - 12/08/15 06:15 PM
DM800HD doesnt load SSL with DreamUp/JapharFlasher
|
Japhar Member
Carpal Tunnel
Registered: 10/21/10
Posts: 2649
|
Johnny... what do you think of it ?
DM800HD doesn't load SSL with DreamUp/JapharFlasher
What can be wrong ?
We set properly the COM port, it does a normal boot/log (but it's in NO CA ERROR), shows DM800HD but doesn't go further loading the ssl to the box.
Test were done with 2 different cables Rs232-Rs232, on 2 different PCs (Laptop Docking and Desktop, both with real Rs232), under WinXP... tested JapharFlasher and DreamUp from Forhike (Patched), both same result, doesn't load the bootloader after recognizing the DM800HD (after DM800HD message shown on DreamUp box). Rj45 cable connected to the router via PowerPlugs for DM800HD and computer (internet via electricity network).
See attached,
TS
Attachments
problem.jpg (187 downloads)
_________________________
DM8000, DM800se, DM500HD, DM800HD, DM7025, DM7020s, DM7000, DM500s VU+ Solo, VU+ Uno, VU+ Duo, Kathrein UFS910 Tivusat, TNTSat, Fransat, SSR/TSR, BBC1-2-3/ITV DE-OpenBlackHole 1.4 image : http://www.openblackhole.com/
|
|
Top
|
|
|
|
|
|
#4093 - 12/08/15 06:19 PM
Re: DM800HD doesnt load SSL with DreamUp/JapharFlasher
[Re: Toysoft]
|
VIP Japhar
stranger
Registered: 11/24/15
Posts: 1
|
I confim this is my problem,
Johnny can you help ?
Grazie !!!
Ciocio
Attachments
log.jpg (177 downloads)
|
|
Top
|
|
|
|
|
|
#4094 - 12/08/15 10:51 PM
Re: DM800HD doesnt load SSL with DreamUp/JapharFlasher
[Re: ciocio]
|
VIPF Japhar
enthusiast
Registered: 03/08/15
Posts: 218
Loc: Netherlands
|
I think of a defective nand flash chip or at least it's disabled. Check the pin 9, if it's connected to ground. More info, see the Flash rom drawing. http://www.ourdreambox.com/ubbthreads.ph...4-schematic.jpg
_________________________
Doing nothing leads to nothing. ------------- Please note, for technical support ------------- Will be given here, or on the jb8a8f8 forum and I prefer it in English. Johnny B. Click on the banner if you like to go there.. 
|
|
Top
|
|
|
|
|
|
|
Previous Topic
Index
