12535 Members
237 Forums
7811 Topics
24004 Posts
Max Online: 9115 @ 08/24/24 07:30 PM
|
|
|
|
|
|
|
|
|
|
1
|
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
|
30
|
31
|
|
|
|
|
|
|
|
|
#4384 - 12/25/15 05:57 PM
Re: No Ca or image failed ! Help !
[Re: pazitush]
|
VIP Japhar
stranger
Registered: 04/06/13
Posts: 21
Loc: The holy land
|
|
|
Top
|
|
|
|
|
|
#4391 - 12/25/15 11:34 PM
Re: No Ca or image failed ! Help !
[Re: pazitush]
|
VIPF Japhar
enthusiast
Registered: 03/08/15
Posts: 218
Loc: Netherlands
|
Yeah okay, but the most important question is, are you be able to execute/finish these instructions.
So, if I understand correctly.
1. You are be able to make a connection with SunRay-FlashUp.
2. You have the Use network enabled.
3. When the flash button activate, you see the Status message, Box is in networked HTTP mode.
4. And you are be able to make a network connection to the box with your browser.
5. And you are be able to upload the image file trough the browser, and afterwards the boot loader.
But.. you still get the No Ca Found issue?
If so, Than you may have a hardware failure with your box.
_________________________
Doing nothing leads to nothing. ------------- Please note, for technical support ------------- Will be given here, or on the jb8a8f8 forum and I prefer it in English. Johnny B. Click on the banner if you like to go there.. 
|
|
Top
|
|
|
|
|
|
#4412 - 12/26/15 06:51 PM
Re: No Ca or image failed ! Help !
[Re: pazitush]
|
VIPF Japhar
enthusiast
Registered: 03/08/15
Posts: 218
Loc: Netherlands
|
Hmm, assuming that you have enough knowledge with network hardware/setting.
So that this can be excluded.
Than I think you may have a hardware problem with your motherboard.
Could be the network, flash nand chip, or even the cpu.
But still hard to say what it really can be.
I do not know if you have some technical skills to do some measurements on the main board.
If so, than I give you some information about this.
If not, you should consider to let it repaired by some one who have the knowledge to repair it.
You may also sent the motherboard to me, if you want that than sent me or Toysoft a private message for the address.
_________________________
Doing nothing leads to nothing. ------------- Please note, for technical support ------------- Will be given here, or on the jb8a8f8 forum and I prefer it in English. Johnny B. Click on the banner if you like to go there..
|
|
Top
|
|
|
|
|
|
#5239 - 01/17/16 12:25 AM
Re: No Ca or image failed ! Help !
[Re: pazitush]
|
VIPF Japhar
enthusiast
Registered: 03/08/15
Posts: 218
Loc: Netherlands
|
Box in repair but it's stuck on FIRST STAGE 1.2/400 {B
That's all.
Never seen this issue, I only know that it is not the bios rom, or the nand flash chip.
Security chip is also fine, and the cpu reads the security chip when booting.
But now the mystery..
When I replace the bios rom with a cardless version, the box boots fine.
So somehow it's related to the sim card security readings.
Very odd error, maybe that someone this has solved, and want to share it.
_________________________
Doing nothing leads to nothing. ------------- Please note, for technical support ------------- Will be given here, or on the jb8a8f8 forum and I prefer it in English. Johnny B. Click on the banner if you like to go there..
|
|
Top
|
|
|
|
|
|
|
Previous Topic
Index