I don't now is that the right thread to expose my problem.I've installed openpli 4.0 iptv on my dreambox 800Se original. All function is ok , but i can't connect my browser to the ip of box, for see channel list and view my chanels from vlc.Web if not connect my box to my pc .

plugin openwebif give my this error: when i launch the plugin I get the error unexpected error , openwebif is not on /dev/sda1/ ecc ecc , i have the image on usb stick. with another image i've not problem.

We don't have such issue on our Japhar images, so it looks strange to us. Try to reflash with Bad Sector Recovery enabled, perhaps you didn't and there is not enough Flash,... and box behaves strangely because of it.

TS

already done

Try to update online the image from feeds, if it was a bug and was fixed,

TS

root@dm800se:/# opkg update
Downloading http://jam.japhar.com/feeds/OpenPLi-4/pli/dm800se/all/Packages.gz.
Updated list of available packages in /var/lib/opkg/OpenPLi-all.
Downloading http://jam.japhar.com/feeds/OpenPLi-4/pli/dm800se/dm800se/Packages.g
z.
Updated list of available packages in /var/lib/opkg/OpenPLi-dm800se.
Downloading http://jam.japhar.com/feeds/OpenPLi-4/pli/dm800se/mips32el/Packages.
gz.
Updated list of available packages in /var/lib/opkg/OpenPLi-mips32el.
root@dm800se:/#


But openwebif not start .

i like that image but from the first reboot I got the errors due to the presence of the image of usb.i think because that I'm using is a backup, that's where the problem .Some plugin seek a path, and do not find it.

Install in Flash, and let us know (don't use any multiboot), then only we will know if it's a bug of the image or incompatibility of your installation.

Your command above is just updating the lists, not the image. Use the GUI way to update the image or enter the full command to also update the image.

Admin

I'll try a clean image and will try to install the a867, my first problem.

The image you got pre-installed with A867 is already a clean image.

Admin

Scuse me but i have hypothesized , visas the errors returned from the plugin menu. Scuse me for bad english.

now i made the reinstall and test.

I just flashed the image you have and the WebIf works just fine... so it's in your side, with things you install or modifications you do, or extra things you flash or configure.

Here flashed into the Flash of the DM800HDse box the image and it works 100%, including WebIf.

Admin

In flash i have yours openpli v13 and i have no problem. but i need install in usb stick for prevent flash memory damage.

Then try again as you surely do something wrong, as if it works with the image, it seems that something done after is corrupting it.

Admin