Ola... queria trocar o meu cartao Ferrari pelo Cartao Japhar.
O cartao que possuo a o NC3 (J/F/S2/SS) para Dream 800 HD.

A minha duvida a se tenho de programar o cartao ou se ele ja vem programado...
Sera que tenho de fazer isto?
Entrar em "bootloader mode". Carregar no botao de "Ligar" na frente, e sem largar, ligar a box no botao ON / OFF da parte de tras. Manter sempre o botao da frente pressionado ata que apareaa imagem, e nesse momento largar.

- Fazer download do ficheiro .NFI ALLSIM SSL84,

- Aceder atravas do browser ao IP indicado na TV e fazer update com o ficheiro .NFI sacado anteriormente.

- Aguardar o update e quando terminar, desligue a box.

- Abra a box e substitua o antigo SIM pelo novo SIM Japhar NC3.

- Voltar a ligar a box em modo "bootloader mode" para se puder enviar uma ROM

- Atualizar para uma ROM a escolha, Ferrari, Japhar (como o Sim2 2,01 / 2,10 apenas nas box DM800HD). Veja aqui:

Ou tenho apenas que enviar a ROM que quero meter sem meter o NFI ALLSIM SSL84.
Obrigado

Thank you ! Merci !

TS

Hello ... As I think Toysoft did not understand, so I will use my English.
I hope you now understand q wrote in Porugues



Hello ... I wanted to change my Ferrari card at Japhar card.
The card I own is the NC3 (J / F / S2 / SS) for Dream 800 HD.

My doubt is if I have to program the card or if it is already scheduled ...
Do I have to do this?
Enter "Bootloader mode". Press the button "Connect" on the front, and without letting go, turn the box on the ON / OFF the back. Always keep the front button until image, and at that point drop.

- Download .NFI ALLSIM SSL84 file,

- Access via IP to the browser shown on the TV and to update with the file .NFI drawn previously.

- Wait for the update and when finished, turn the box.

- Open the box and replace the old SIM with the new SIM Japhar NC3.

- Reconnect the box in "bootloader" mode to can send a ROM

- Upgrade to a ROM to choose from, Ferrari, Japhar (as Sim2 2.01 / 2.10 only in box DM800HD). Look here:

Or just I have to send the ROM you want to get without scoring the NFI ALLSIM SSL84.
Thank you

Hello !

Yes I thought you explained how to flash the box ;o).

So your sim you received is Ferrari compatible (SuperSim3 Japhar = Japhar+Ferrari+Sim2), so you can just replace the old Ferrari sim by the new Japhar one. As it's already programmed for DM800HD.

Then as for Ferrari or other sims, if your SSL is lower than 84, you need to flash a compatible SSL84J or SSL84F/SSL87F/SSL88F or SSL84 ALLSIM. Reboot and then Flash the image (Ferrari, Japhar or Sim2).

If your actual SSL is 84, then just flash the image (Ferrari, Japhar or Sim2), and it will work.

TS

Hello good day.

I'm sorry, but I still do not understand.
I have a Dreambox 800 HD PVR with yes Ferrari and wanted to change the yes to Japhar DM800DH NC3 (J / F / S2 / SS3.
My doubt is ... yes DM800DH NC3 (J / F / S2 / SS3) comes with all SSL or have to get SSL 84J for me to get a picture, for example the Open Pli 4

By the way, another question ... if I want to change my image, I have always put the SSL concerning that image or is not necessary?
PS. this time my receiver has SSL 84 F

Thank you

Ok, so I will have to explain you how things work.

SSL = Bootloader inside the image and stored in the Flash of the box.

NFI Image = Full image (Linux+Enigma2) including a SSL.

Sim card = Can be Ferrari, Japhar etc.

The Sim card is "compatible" with specific bootloaders/SSL. If you use the wrong bootloader for the Sim, the Sim will not work with the bootloader and box will block/not boot.

The Japhar SuperSim3 NC3 is capable of running ALL images / Bootloaders from Ferrari, Japhar and Sim2. So all the SSLxxF, SSLxxJ, SSLxxa, SSLxxb, SSLxxc, SSLxxd will work with the Japhar SuperSim3. So you can run Sim2 2.01/2.10 images as well as Japhar images (OpenPli 4.0 IPTV SSL84J) and Ferrari images (SSL84F, SSL87F, SSL88F etc).

You just have to remove the old sim and insert the Japhar Sim, and your box will then recognize all the clone SSL/images.

The necessity to load the SSL first is only needed if the SSL before was lower than 84. If it was already a 84 then you can directly flash the image.

Admin

P.S.: For Members, the NC3 SuperSim3 DM800HD Japhar is available on the Members eshop at http://www.japhar.com/japhar/

Thank you, now is well explained.
hug

Good morning once more.

Already now another small promenor to me to be no doubt ..
In my receiver have SSL 88F with Ferrari card.
When changing the card Japhar DM800DH NC3 (J / F / S2 / SS3., And putting the Open Pli 4 IPTV image ... I have to put the SSL84J? ..

Thank you

Once you have the Japhar Sim in the box, it will be capable of running all images with SSLxxF (SSL84F, SSL88F, SSL87F, SSL82F etc).

For Ferrari the SSL84 Family is : SSL84F, SSL87F, SSL88F
For Ferrari the SSL82 Family is : SS82F, SSL83F

For Japhar the SSL84 Family is : SSL84J

So if you already have SSL88F in the box, the Japhar Sim will boot it no problem and you can directly flash the OpenPli 4.0 IPTV SSL84J into the box, naturally the box MUST have inside the Japhar Sim to be capable of running the Ferrari AND the Japhar images.

As expained previously, the SSL is inside the image. So the OpenPLi 4.0 IPTV already has built-in the SSL84J inside. As you already had a SSL (from SSL84 family Ferrari) you just need to flash the image and not need to flash previously a SSL84J.

TS

Hello, I think this explanation will take a lot of people doubt ... once again my thanks.