Dreambox 800HD the original is not one image openpli 4 well! Disaster!

Dream Multimedia stopped / RIP / EOL the DM800HD in 2013, and all development stopped then for original boxes. Because they wanted you to change your box to a newer one.

The latest OpenPli for Original boxes, is the OpenPLi 2.1 that you can find on the Official Website of OpenPLi here, so all other 3.0 and 4.0 were never built for DM800HD due to the EOL of the DM800HD in 2013. See here : http://openpli.org/download/dreambox/dm800/

You have the original images here, but naturally starting to become older and older : http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=104&page=1

Only Clone teams continued the support, but today EStar, Ferrari and Sim2 stopped that support. The only Team who continues support is the Team Japhar.

So if you really want your DM800HD to continue to work well and have latest software it's highly wished to upgrade to the Japhar Sim, and you will then have access to all the Japhar DM800HD SuperSim3 images, as well as all the Ferrari images and all the Sim2 2.01/2.10 images.

Here you will find all the images supported by the Japhar NC3 sim that you can find here, http://www.japhar.com/japhar/

Images for Japhar : http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=47&page=1

Have a good evening ;o)

Admin

Thank you, but here's the thing, I will give as openpli 4.0 with IPTV and GStreamer 1.6.2., the update over the web, but then it gets stuck in the boot and half over!

As explained, the images are built to run with the Japhar Sim, and we only can support with Japhar Sim as we have no idea why you have problems with other hardware/sims.

To be in the exact same condition as us, so we can give support as we can replicate your problem and find a solution, you need to have a Japhar sim in your box.

But you can still use this image version (with your DM800HD Original with Original sim) built with 1.6.2 GStreamer. The image is already a hell in advance compared with all other images for Original DM800HD boxes. If you want to use the latest image, you should think to upgrade your sim in your box to Japhar.

Admin

Running latest Open Pli with Japhar NC3 on my DM800HD but I keep having crashes while trying to scan& save packages on 42E for example.
Here is the crash log-

<833563.675248> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
<833563.675884> [eDVBFrontend] prepare_sat System 0 Freq 12746000 Pol 1 SR 2222000 INV 2 FEC 0 orbpos 420 system 0 modulation 1 pilot 2, rolloff 0
<833563.676275> [eDVBFrontend] tuning to 2146 mhz
<833563.676546> [eDVBChannel] OURSTATE: tuning
<833563.689465> [eDVBFrontend] set static current limiting
<833563.696691> [eDVBFrontend] setTone 0
<833563.713484> [eDVBFrontend] sleep 25ms
<833563.739172> [eDVBFrontend] set sequence pos 7
<833563.739784> [eDVBFrontend] invalidate current switch params
<833563.859654> [eDVBFrontend] sendDiseqc: e00000(DiSEqC reset)
<833563.861853> [eDVBFrontend] sleep 50ms
<833564.030637> [eDVBFrontend] sendDiseqc: e00003(DiSEqC peripherial power on)
<833564.051678> [eDVBFrontend] sleep 150ms
<833564.333640> [eDVBFrontend] sendDiseqc: e01038f9(?)
<833564.335283> [eDVBFrontend] sleep 50ms
<833564.385674> [eDVBFrontend] set sequence pos 3
<833564.386512> [eDVBFrontend] setTone 1
<833564.397808> [eDVBFrontend] sleep 10ms
<833564.408276> [eDVBFrontend] update current switch params
<833564.408853> [eDVBFrontend] startTuneTimeout 20000
<833564.409426> [eDVBFrontend] setFrontend 1
<833564.409730> [eDVBFrontend] setting frontend 0
<833564.440234> [eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 1
<833564.441499> [eDVBFrontend] sleep 500ms
<833564.451450> [eDVBFrontend] (0)fe event: status 1, inversion off, m_tuning 2
<833564.572328> [eDVBFrontend] (0)fe event: status 3, inversion off, m_tuning 3
<833564.942729> [eDVBFrontend] set dynamic current limiting
<833565.023450> [eDVBFrontend] (0)fe event: status 1, inversion off, m_tuning 4
<833566.866484> [eDVBFrontend] (0)fe event: status 3, inversion off, m_tuning 5
<833567.322302> [eDVBFrontend] (0)fe event: status 1, inversion off, m_tuning 6
action -> SetupActions save
ok
<833575.822504> [eDVBFrontend] (0)fe event: status 3, inversion off, m_tuning 7
<833576.284415> [eDVBFrontend] (0)fe event: status 1, inversion off, m_tuning 8
<833578.000309> [eDVBFrontend] (0)fe event: status 3, inversion off, m_tuning 9
action -> SetupActions save
ok
<833578.462957> [eDVBFrontend] (0)fe event: status 1, inversion off, m_tuning 10
<833580.894419> [eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC
<833580.895745> [eDVBLocalTimerHandler] getRTC returned time=0. RTC problem?
<833584.409318> [eDVBChannel] OURSTATE: failed, fatal
<833584.409959> [eDVBScan] no channels left: 69 scanned, 137 unavailable, 68 database.
<833584.480408> [eBouquet] couldn't write file userbouquet.LastScanned.tv
<833584.480823> [eDVBDB] Renumbering...
<833584.489566> [eDVBDB] ---- saving lame channel db
<833584.490390> FATAL: [eDVBDB] couldn't save lame channel db!
]]>
</enigma2crashlog>
</crashlogs>
</openpli>

That's normal, you don't have enough Flash memory available, run the script or do some "cleaning",

Admin

Read : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=7115#Post7115

Thanks!
In which folder to put the script file ?

Just run it, you can also run it from the JAM 5.2 where we included it to have it easy for members (but be careful as it could remove your language from the box... so could be better if not IT/FR/GR/ES/UK/EN, to run the script omitting the right language for your country).

Admin

Sorry for the ignorance but I may be not so familiar how "just to run it.." I an used to have the scripts in the scripts folder and to run it from the DM . Appreciate if you can guide me how to "run" it...

Sure no problem ;o)

Copy the data from the box below,



But seeing your country of origin, that language was removed so here it is with your country of origin language as well kept (not removed as the precedent one).



So your country, as well as FR, IT, ES, UK/EN, DE are kept with that script. All other are removed.

So you copy the text from the second box above and then login into your box with telnet or ssh, and paste all that text into the console, it will do the job for you. You should then gain 3-4 Mb more of Flash.

TS