Seen this asked many times so thought I'd put together a guide how to setup Crossepg to download and populate your EPG.

1. Make sure you have a USB stick or HDD attached for EPG data storage.
2. Press Menu > Setup > System > EPG > Settings. Using left & right buttons either side of OK set the EPG location to /media/hdd or /media/usb. Other settings in this screen can remain as default for the purpose of this guide.
3. Press green OK.
4. Now select Crossepg and press OK.
5. Select configure and press OK.
6. Change scheduled download to once a day as for most users this is enough.
7. Set scheduled download time.
8. Press Red button for BACK.
9. Select Update rytec providers and press ok.
10. Select Update XEPGDB providers and press ok.
12. Select the EPG source that you want to use for EPG data. Do not select more than what you actually use and need as selecting too many will cause memory issues. For the purpose of this guide we will select Open TV Providers > highlight open TV (astra 28.2), press OK to enable this provider and GREEN tick will appear.
13. Press RED for BACK and keep pressing exit to exit all screen.
14. Press Blue button > Select Crossepg and press OK. Crossepg will now download EPG data. Be patient and let it finish then the EPG that you selected will be populated.

This should get most peeps started with Crossepg.

EPG data will always be saved provided your power down and reboot your receiver in the correct manner by pressing standby or holding down the standby button on your remote and selecting restart.

More info regards Crossepg: -

Running CrossEPG in flash will fill it up very quickly and cause MAJOR issues, as even just using 28.2 as a data source can will use 60mb on first data pull, and grow each day, one of my receivers just using 28.2 is currently 102mb (this is the CrossEPG database NOT the epg.dat file).

Use "Download Now" to update the database.

Download here RAED/Faibird CrossEPG plugin version.

English GUI