hi,
i see that in blackhole image this module is working.

firmware-dvb-usb-af9015 - 1.0-r0

in black hole is working and i want to test it on this image.

this is the same?
Afatech AF9015 DVB-T - v4l-dvb-module-dvb-usb-af9015 - dvb-usb-af9015




root@vusolo:~# lsmod
Module Size Used by
fuse 79663 0
nfsd 93327 11
exportfs 3786 1 nfsd
autofs4 23448 1
ipv6 314320 24
zram 9018 1
brcmfb 1399 2
dvb_bcm7325 5350652 28 brcmfb
tda18218 3342 1
af9013 14587 1
dvb_usb_af9015 16875 2
bh_dvb_usb_v2 14841 1 dvb_usb_af9015
bh_rc_core 18510 3 bh_dvb_usb_v2,dvb_usb_af9015
procmk 1492 1 dvb_bcm7325
bh_dvb_core 85958 1 bh_dvb_usb_v2
isofs 25177 0
udf 96935 0
ext2 54391 0
root@vusolo:~# opkg list | grep af9015
firmware-dvb-usb-af9015 - 1.0-r0 - firmware-dvb-usb-af9015 version 1.0-r0 firmware-dvb-u sb-af9015 version
media-tree-module-dvb-usb-af9015 - 0.0+git20140924-r0.11 - dvb-usb-af9015 kernel module dvb-usb-af9015 kernel module; Afatech

Images are different images and every driver needs to be compiled for the image it is used with.

If the current driver on the image doesn't work, we don't have the possibility to use drivers from other images. The only way is to get the source code from the working driver and compile it for the image.

You cannot use driver from one image into another one.

Admin

yes i know,
but why on last versions of openpli or openblackhole is not working?
openpli or openblackhole image from 6 monts ago, usb key was working, o.k.

We had no OpenBlackHole 6 months ago, the first one is the actual one. And concerning the OpenPLi 4.0 IPTV, it would be important to know until which version it worked, as without as much as possible precisions we cannot check.

Admin

in this post there is differant name.
what name is correct for af9015'

this: opkg install --force-overwrite kernel-module-dvb-usb-af9015
or this that is in post: opkg install --force-overwrite kernel-module-v4l-dvb-module-dvb-usb-af9015


How to install a DVB-T stick with OpenPLi 4.0 IPTV ?

You need to know which chipset/dongle you have, then you can easily with 4 commands do all the job, you will need to send them with Telnet/SSH,

opkg update
opkg install --force-overwrite v4l-dvb-module-dvb-usb
opkg install --force-overwrite v4l-dvb-module-dvb-XXXXXXXXX
reboot

Where the v4l-dvb-module-dvb-XXXXXXXXX is the name below of your chipset/dongle.

Then to load the module for example do this :
modprobe XXXXXXXXX (= Module below, eg "smsusb")

or

insmod smsusb.ko
insmod smsmdtv.ko

The table of the Dongles recognized is (in green the name to add to the 3rd command above).

Abilis AS102 DVB receiver - v4l-dvb-module-dvb-as102 - dvb-as102
Afatech 9005 DVB-T USB1.1 stick - v4l-dvb-module-dvb-usb-af9005 - dvb-usb-af9005
Afatech AF9015 DVB-T - v4l-dvb-module-dvb-usb-af9015 - dvb-usb-af9015

If you read the title of the topic we gave you as example, the topic was about the A867 as example. Then you have to deduct the proper name depending if its for DM or VU, and naturally which chipset you want to install that is in your DVB-T Dongle...

So I don't see the point on reposting what we posted, instead you have to read it and deploy the logic to use and deduct what should be the name of ipk to install from the feeds.

The names of ipk/packages are different depending of the image these are built for, and naturally the chipset it target for installation... there is not one general name that works with all dongles and all boxes for sure. You need to logically deduct what it should be or check on the feeds on the box which one with grep is available for the model you need.

On our answers we gave you the name of the files for the A867 for VU+ and for DM. From these you should be capable of deducting what it should be.

Link : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=5659#Post5659

Also ... NO DOUBLE POSTS. PLEASE !

Admin

o.k.
drivers are installed but still no usb decoder in menu.

what if i try instaling *.ipk package?
can you provide me one for af9015?

root@vusolo:~# opkg list | grep af9015
enigma2-plugin-drivers-dvb-usb-af9015 - 1.0-r3 - enigma2-plugin-drivers-dvb-usb- af9015 version 1.0-r3
enigma2-plugin-drivers-dvb-usb-af9015-dbg - 1.0-r3 - enigma2-plugin-drivers-dvb- usb-af9015 version 1.0-r3 - Debugging files
enigma2-plugin-drivers-dvb-usb-af9015-dev - 1.0-r3 - enigma2-plugin-drivers-dvb- usb-af9015 version 1.0-r3 - Development files
firmware-dvb-usb-af9015 - 1.0-r0 - firmware-dvb-usb-af9015 version 1.0-r0
Firmware for dvb-usb-af9015
kernel-module-dvb-usb-af9015 - 3.1.1-r4.10.11 - dvb-usb-af9015 kernel module dv b-usb-af9015 kernel module; Driver for

So the box is VU, the second example is the correct one, that I recopy here,

For VU+ :


You then replace the "kernel-module-dvb-usb-a867" by the one for your Dongle, that is AF9015 chipset.

So it should be (the second command) as the one below,



That's should be the logic to deploy,

TS

i know i knwo, but is not working.

root@vusolo:~# opkg update
Downloading http://jam2.japhar.com/feeds/OpenPLi-4/ff/vusolo/all/Packages.gz.
Updated list of available packages in /var/lib/opkg/OpenPLi-all.
Downloading http://jam2.japhar.com/feeds/OpenPLi-4/ff/vusolo/mips32el/Packages.gz.
Updated list of available packages in /var/lib/opkg/OpenPLi-mips32el.
Downloading http://jam2.japhar.com/feeds/OpenPLi-4/ff/vusolo/vusolo/Packages.gz.
Updated list of available packages in /var/lib/opkg/OpenPLi-vusolo.
root@vusolo:~# opkg install --force-overwrite kernel-module-dvb-usb
Package kernel-module-dvb-usb (3.1.1-r4.10.11) installed in root is up to date.
root@vusolo:~# opkg install --force-overwrite kernel-module-dvb-usb-af9015
Package kernel-module-dvb-usb-af9015 (3.1.1-r4.10.11) installed in root is up to date.
root@vusolo:~# reboot

i think that module is not working..

root@vusolo:~# modprobe dvb-usb-af9015

Then the driver for the image is not compatible with your dongle,

Admin