Ciao a tutti scusate
sto installando l'ultima immagine japhar su 500 hd ma sono bloccato all'installazione di openvpn
do questi comandi:
opkg update
opkg list | grep vpn
opkg install openvpn

ma ottengo questo errore

Downloading http://jam2.japhar.com/feeds/OpenPLi-4/j....4_dm500hd.ipk.
Configuring liblzo2-2.
Configuring kernel-module-tun.
Configuring openvpn.
depmod: WARNING: could not open /lib/modules/2.6.18-7.4-dm500hd/modules.order: No such file or directory
depmod: WARNING: could not open /lib/modules/2.6.18-7.4-dm500hd/modules.builtin: No such file or directory

come posso fare? grazie mille

Sono solo Warnings, tutto dovrebbe essere stato istallato correttamente se c'era abbastanza spazio Flash nel box.

Admin

ciao grazie innanzitutto per l'attenzione
come hai consigliato ho installato prima di tutto una pennetta per aumentare la flash ed e' andato tutto ok

se provo a stoppare e startare ottengo questo

OpenPLi 4 dm500hd - Support Forum http://www.japhar.com/


dm500hd login: root root@dm500hd:~# /etc/init.d/openvpn stop
Stopping openvpn: client.
root@dm500hd:~# /etc/init.d/openvpn start
Starting openvpn: client.
root@dm500hd:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:09:34:28:5E:89
inet addr:192.168.1.13 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::209:34ff:fe28:5e89/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3769 errors:0 dropped:0 overruns:0 frame:0
TX packets:1548 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:790305 (771.7 KiB) TX bytes:158888 (155.1 KiB)
Interrupt:16

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:10 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:700 (700.0 B) TX bytes:700 (700.0 B)


in realta' non ho trovato una cartella openvpn dopo l'installazione
ho messo quella che uso solitamente sugli altri decoder con i certificati giusti ma non mi da' un ip vpn

I found the infos below on internet,

and check this topic on the forum about the same argument,

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=2414#Post2414

Admin

-------------------------

1. Get/Create/Download your .conf file
2. Telnet onto your Solo2
3. Type in "opkg install openvpn"
4. FTP to your Solo2 and navigate to the /etc/openvpn directory
* You can't see this directory by default, just enter it as a path
5. Copy your .conf file onto the Solo 2
6. Rename your .conf file to "client.conf"
7. Type in mkdir /dev/net
8. Type in mknod /dev/net/tun c 10 200
9. From Telnet, type in /etc/init.d/openvpn start

-------------------------------------

Initially thought OpenVPN was not installed. From Menu/Setup/../Network/OpenVPN showed "Enabled" but "Not Running" and when I clicked green it did not change and nothing was displayed in the log file.

I logged in via ssh and uninstalled OpenVPN and then re-installed to see what was going on - no errors.

I executed "openvpn" from the command line and hey presto i got output back from openvpn.

So next step was to get the config files for your OpenVPN connection.

MY provider ( AirVPN ) have a nice web interface that create the config files for you.

I was supplied with

ca.crt
user.crt
user.key

and a number of .ovpn files which are the ..config files to configure openVPN connection.

i copied all files to /etc/openvpn

and then from the command line i executed

openvpn ./italy.ovpn

but during the openvpn connection process i was getting error

Tue Jan 15 08:25:57 2013 Note: Cannot open TUN/TAP dev /dev/net/tun: No such file or directory (errno=2)

After some research it was clear the device /dev/net/tun needed to be created - i guess the question is why this isn't installed when you install OpenVPN , there maybe a good reason for this.

i found the following statements and ran

mkdir /dev/net
mknod /dev/net/tun c 10 200

I then re-ran

openvpn ./italy.ovpn

and got connected.

i stopped everything.

i renamed italy.ovpn to client.conf*

and then then from the command line executed

/etc/init.d/openvpn start
*

... need to work out how to log some info to log file but apart from that it looks to be working ok for me.

GRAZIE MILLE HO RISOLTO
avevi ragione,era tutto installato ed erano solo warning
Non era sincronizzato l'orario
sistemato l'orario si sono allineati ed e' partito tutto
grazie

Bene, sono contento che sia risolto,

Buon divertimento !

Admin