i sold mine years ago, i will think about it...

i think that i am close to fix af9015 on this image

The Japhar team has great support and if they can support the VU+ solo range it will make alot of people happy smile .... openpli, atv, opensi new 2017... thanks

;o)

Hi Admin, hi Toysoft,
I do have an Vu+solo clone, v3 I think-its nothing written within or outside the box. I installed the OpenPli for v3 above and
it works. The prob is , that I cannot get the tuner recognized so no channals, no fun.
Is there anything I can do to get it working- driver or so?
Your help would highly be apreciated.

Greetings
bibo1

If you cannot get the Tuner recognized, then try the image V2 version, it should work.

TS

Thanks Taysoft for Your quick reply. The point is, that I already tried the v2 version but without success, after the installation
and restart it gets stack during the boot with the following information at the HT:

Code: (Bad address in epc)

---[ end trace 1e44028d56280140 ]---
Kernel panic - not syncing: Fatal exception in interrupt
Rebooting in 180 seconds..

bibo1

Try other versions, to see if all do the same error or only this one.

Admin

hi Admin, hi Toysoft,
the last 3 days I tested allmost all images I could find here
and on other forums -v2 and v3,v3a, without success.
The v2 get the above error message in the HT as above mentioned. The only v3a I get into the box proper working, but no tuner working. I am not shure what kind of clone I have actually? Any further idea what else I can do? Because
I just replace the PSU with the two step down units as they are discribed in Johnnys Forum and now the rest does not work properly, its a chame, isn't it?

Yes, definitely ! It should work as v2 works everywhere, then I think you have to open a specific topic at Johnny's Forum as your issue seems to be more than a normal software issue,

Admin

Thanks Admin, I'll do. F we come to an workable result i let You know.